Embedded module TQMa6x - VxWorks BSP documentation



due to licensing restrictions this BSP is available only on request

u-boot 2013.04-20140226

Component Status Remarks
CPU + i.MX6Q (Cortex®-A9)
Ethernet + 1 x FEC (100 MBit working, GiGE under investigation)
+ USB - Ethernet Bridge
eSDHC + SD card / eMMC
UART + one for console
I²C + EEPROM, Temperature Sensors
GPIO custum configuration on request
IIM/Fuse - on request
SPI + SPI NOR Flash
eMMC / SD boot +
TFTP boot +
SPI NOR boot +
Key: + tested | - untested | ? open

BSP has been created for STKa6Q (TQMa6Q + MBa6x)

TQ Product Device Interface Function Remarks
TQMa6x i.MX6 ENET (X11) RGMII (10/100/1000 Mbit/s)
I2C3 Bus access
UART2 (X15)
GPIO
USB_OTG Host
USB_OTG Client
IPU1 Parallel LCD Display ET0700G0DH6
HDMI HDMI tested with 1280×1024


the BSP kernel is configured for HDMI video output by default. You have to compile a new kernel for the parallel LCD.

  • Last modified: 2022/08/04 15:02