en

User Tools

Site Tools


vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

Embedded module TQMa7x - QNX Neutrino BSP documentation



BSP Overview

Due to licensing restrictions this BSP is available only on request

Bootloader

U-Boot 2016.03 (NXP imx-rel_imx_4.1.15_2.0.0_ga)

Supported features

Feature QNX Revision Remarks
TQ Product Chip Interface Function 6.6.0
TQMa7x i.MX7 Ethernet 2x RGMII (10/100/1000 Mbit/s)
TQMa7x i.MX7 Fuses
TQMa7x i.MX7 GPIO custom config on request
TQMa7x i.MX7 I²C EEPROM, Temperature Sensors, RTC
TQMa7x i.MX7 qSPI QSPI SPI NOR Flash
TQMa7x i.MX7 UART6 RS232 default console
TQMa7x i.MX7 USB USB Storage Device
TQMa7x i.MX7 uSDHC eMMC / SD-Card SD card / eMMC


Supported boot devices

Boot device supported
eMMC
SD Card
QSPI NOR

Operating System

Supported Features

Feature QNX Version Remarks
TQ Product Chip Interface Function 6.6.0
TQMa7x i.MX7 eCSPI1
i.MX7 eCSPI2
i.MX7 ENET1 RGMII
(10/100/1000 Mbit/s)
incompatible with MBa7x Rev.010x
i.MX7 FLEXCAN1 CAN 2.0B
i.MX7 FLEXCAN2 CAN 2.0B
i.MX7 I2C1 I2C devices see supported onboard I2C devices
i.MX7 I2C2 I2C devices see supported onboard I2C devices
i.MX7 LCD1 Parallel LCD LVDS and LCD1 are mutually exclusive, special devicetree needed
comming soon with QNX7
i.MX7 PCIe Device Discoery on request
i.MX7 QSPI Bus access
Memory access
on request
i.MX7 UART3 TTL not available on MBa7x
i.MX7 UART4 TTL not available on MBa7x
i.MX7 UART5 TTL not available on MBa7x
i.MX7 UART6 RS232 Default Console
i.MX7 USB_Host USB4604
i.MX7 USB_OTG1 Host
i.MX7 USB_OTG1 OTG
i.MX7 uSDHC uSDHC1 SD Card
uSDHC3 eMMC
HS200 / HS300 Mode for uSDHC3
HS MODE for SD Card on uSDHC1 needs switchable supply voltage, not available on MBA7x
MBa7x USB4604 USB1 Host
USB4604 USB2 Host




Onboard I2C devices



I2C bus TQMa7x
I2C1 0x08
PMIC
0x48
LM75A
0x50
EEPROM
0x68
RTC
0x49
LM75A
0x57
EEPROM
0x68
RTC (optional DS1339)


I2C bus MBa7x
I2C2 0x18
Audiocodec
0x2D
HSIC HUB 0x19
Tempsensor
0x20
PCA9554
0x6A
Clock Generator


en/arm/tqma7x/qnx.txt · Last modified: 2017/09/18 13:00 by liedmann


Disclaimer

TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.


Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki