en

User Tools

Site Tools


vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

TQMP2020: Feature overview

U-Boot

Component Status Remarks
UART + UART1
Ethernet + 2x RGMII + 1x SGMII or 3x RGMII
USB 2.0 Host +
SDHC /MMC +
EEPROM + 3x (I2C addresses: 0x50, 0x37, 0x57)
RTC +
Temperaturesensor +
PCIe + 2x
NOR-Flash +
DDR-SDRAM + DDR3

Linux kernel

Component Status Remarks
Prozessor + SMP w/ two cores
UART + UART1 (ttyS0), UART2 (ttyS1)
Gigabit Ethernet + 2x RGMII + 1x SGMII or 3x RGMII
USB 2.0 Host +
SDHC /MMC +
I2C + 2x
COP/JTAG +
EEPROM + 3x (I2C addresses: 0x50, 0x37, 0x57)
RTC + missing from default configuration, set CONFIG_RTC_DRV_DS1307=Y
Temperaturesensor + 2x (I2C adresses: 0x4c, 0x1f)
PCIe + 2x
NOR-Flash + (direct access only, no mtd)
DDR3 +

Key:

+ tested

- untested

? open


en/tqmp2020/features.txt · Last modified: 2012/09/18 09:05 by lenz


Disclaimer

TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.


Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki