en

User Tools

Site Tools


vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

Configuration of virtual machines

Used versions

  • Ubuntu 10.04 x86 as guest OS
  • Windows XP Professional 5.1.2600, Service Pack 3 as host OS
  • VMware® player 3.0.0 build-203739

Configuration of network bridge

Benefits:

  • No configuration necessary
  • Guest is member in the net

Drawback:

  • Guest is in the net like a “normal” host

Configuration of the target

The IP address of the virtual machine must be registered as the server IP in the target.

Configuration of NAT (Network Address Translation)

Access to NFS or TFTP of the virtual machine does not work.

Benefits:

  • Guest is not reachable from the network
  • Guest can access network via NAT

Drawback:

  • Configuration very complex

Configuration of the target

The IP address of the host must be registered as the server IP in the target.

Configuration of Windows XP for port forwarding

The settings of the port forwarding can be done in the Windows Firewall. Go to the “Advanced” tab and select the LAN connection which connects the host and the target. Click on “Settings”.

In the following window click on “add” and enter the necessary details.

For TFTP this is the following data:

  • Service description: Trivial File Transfer Protocol (TFTP)
  • Name or IP address: enter the IP address of the virtual machine
  • External and internal port number: 69 UDP

Copying of virtual machines

When copying virtual machines, it may be that a new Ethernet device with a new MAC address is created. If the Ethernet device gets a new name (eth2 …), you have to add auto to the name of the interface in the file etc/network/interfaces (e.g., auto eth2). Then the service networking must be restarted (sudo service networking restart). Alternatively, you can edit the file /etc/udev/rules.d/70-persistent-net.rules and assign the MAC to the eth0 device.


en/vm.txt · Last modified: 2014/05/02 07:09 by lenz


Disclaimer

TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.


Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki