ENET / MAC Fuses brennen
========================
Umgebung: U-Boot
(Test mit U-Boot aus BSP Rev.0100)

ACHTUNG: Beide MAC-Adressen müssen fortlaufend sein!

MAC1	aa:bb:cc:dd:ee:ff
MAC2	AA:BB:CC:DD:EE:FF

# fuse bank 4 word 2: MAC1 lo
# fuse bank 4 word 3: MAC1 hi / MAC2 lo
# fuse bank 4 word 4: MAC2 hi
# fuse bank 0 word 0: MAC_LOCK 01 (write protect) - read Reference manual for overrride protect

fuse prog -y 4 2 ccddeeff
fuse prog -y 4 3 EEFFaabb
fuse prog -y 4 4 AABBCCDD
fuse prog -y 0 0 00000100

Beispiel:
---------
MAC0 = 00:d0:93:2c:ba:d2
MAC1 = 00:d0:93:2c:ba:d3

fuse prog -y 4 2 932cbad2
fuse prog -y 4 3 bad300d0
fuse prog -y 4 4 00d0932c

fuse prog -y 0 0 00000100