~~NOCACHE~~
====== Entry Page ======

===== Product URL list =====
[[https://www.tq-group.com/en/products/tq-embedded/arm-architecture/tqma28/|TQ product page TQMa28]]\\  

===== Board Support Packages =====
  * [[.linux:ptxdist:overview|PTXdist Linux BSP Documentation]]
  * [[:tqma28|ELDK / debian based BSP]] <wrap important>discontinued</wrap>
  * [[.:windows_ce|Microsoft® Windows® CE]]
  * [[.:qnx:overview|QNX® Neutrino®]]<wrap important>New</wrap>

===== Third-Party Add-Ons =====
   * [[:en:third-party:ittia:db-sql|ITTIA DB SQL]]

===== Starterkit =====

  * [[.:mba28:dip_switches|  MBa28 DIP switch settings]]

====== Hardware ======
===== Onboard I2C devices =====



====== Hardware Issues ======



====== Linux BSP ======
===== U-Boot =====
==== Supported Features ====
^ Feature ^^^^  BSP Revision  ^^^^^^^^ Remarks  ^
^ TQ Product ^ Chip  ^ Interface  ^ Function  ^  100  ^  101  ^  102  ^  106  ^  109  ^  115  ^  117  ^  119  ^ :::  ^
| TQMa28 | i.MX28  | CPU   |   |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |   i.MX287, i.MX283  |
| ::: | :::  | EMI  | DDR2 SDRAM  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |   |
| ::: | :::  | SSP0  | eMMC  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  | [[..:..:mba28:dip_switches#boot_medium_selection_s4_s5|boot device]]  |
| ::: | :::  | SSP1  | SD card  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  | [[..:..:mba28:dip_switches#boot_medium_selection_s4_s5|boot device]]  |
| ::: | :::  | I2C0  | Bus access  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  | intended for customer use  |
| ::: | :::  | I2C1  | Bus access  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |   |
| ::: | :::  | I2C1  | LM73  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |   |
| ::: | :::  | :::  | M24C64  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |   |
| ::: | :::  | OCOTP  |   |    |    |    |  •  |  •  |  •  |  •  |  •  |   |
| ::: | :::  | AUART3  | RS232  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  | RX/TX/RTS/CTS, TTL available on X14  |
| ::: | :::  | ENET-MAC0  | 10 Mbps and 100 Mbps Ethernet/IEEE 802.3  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |
| ::: | :::  | ENET-MAC1  | 10 Mbps and 100 Mbps Ethernet/IEEE 802.3  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |
| ::: | LM73  | I2C  | Temperature sensor  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |
| ::: | M24C64  | I2C  | EEPROM  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |
| MBa28 | LM73  | | Temperature sensor  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |
<wrap round info>Above table primarily applies to platform **tqma28**, please see changelog in tab "Bootloader" for details on differences to platform **tqma28-fsl**</wrap>
----



===== Kernel =====
===== Operating System =====
==== Supported Features ====
\\
^ Feature ^^^^	BSP Revision	^^^^^^^^ Remarks	^
^  TQ Product  ^  Chip  ^  Interface  ^  Function  ^  100  ^  101  ^  102  ^  106  ^  109  ^  115  ^  117  ^  119  ^ ::: ^
| TQMa28 | i.MX28  | CPU   |   |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |i.MX287, i.MX283  |
| ::: | :::  | AUART0  | RS485  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |    |
| ::: | :::  | AUART1  |   |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  | RX/TX, TTL available on X14  |
| ::: | :::  | AUART2  |   |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |not available due to pin multiplexing  |
| ::: | :::  | AUART3  | RS232  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  | RX/TX/RTS/CTS, TTL available on X14  |
| ::: | :::  | AUART4  |   |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  | RX/TX/RTS/CTS, TTL available on X10  |
| ::: | :::  | CAN0  | CAN 2.0B  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |   |
| ::: | :::  | CAN1  | CAN 2.0B  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |   |
| ::: | :::  | DUART  | RS232  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  | RX/TX, TTL available on X14  |
| ::: | :::  | EMI  | DDR2 SDRAM  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  |
| ::: | :::  | ENET-MAC0  | 10 Mbps and 100 Mbps Ethernet/IEEE 802.3  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  | BSP Rev. < 0106: Supports internal ethernet clock only\\ BSP Rev. ≥ 0106: Supports external (default) or internal ethernet clock ([[.:faq#linux_errorno_phy_found_or_segmentation_fault_when_ifconfig_up|selectable]])\\ [for background infos cf. [[support@tqs.de?subject=Request Technical Note TQMa28-MBa28|Technical Note TQMa28-MBa28]]]\\ MBa28 Rev. ≥ 0106: Provides 50 MHz crystal oscillator as an external clock source for ethernet  |
| ::: | :::  | :::  | IEEE-1588  |    |    |    |     |     |     |   |
| ::: | :::  | ENET-MAC1  | 10 Mbps and 100 Mbps Ethernet/IEEE 802.3  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  | :::  |
| ::: | :::  | :::  | IEEE-1588  |    |    |    |     |     |     |     |    |
| ::: | :::  | HSADC  |   |    |    |    |     |     |   | <wrap hide>see [[..:constraints]]</wrap>  |
| ::: | :::  | I2C0  | Bus access  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |     |
| ::: | :::  | I2C0  | Boot EEPROM (0xA0)  |    |    |    |   •  |  •  |  •  |  •  |  •  | TQMa28 Rev. ≥ 0200  |
| ::: | :::  | I2C1  | Bus access  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |     |
| ::: | :::  | I2C1  | LM73  (0x49)   |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |     |
| ::: | :::  | :::  | M24C64 (0x50)  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  | intended for customer use  |
| ::: | :::  | I2C1  | PCA9554D (0x20)  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |     |
| ::: | :::  | :::  | PCA9554D (0x21)  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |     |
| ::: | :::  | :::  | LM73 (0x4A)   |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |    |
| ::: | :::  | :::  | SGTL5000  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |    |
| ::: | :::  | LCDIF  | parallel display  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  | FG0700M0DSSWMG01	|
| ::: | :::  | LRADC  | 4/5-wire touch-screen  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |   |
| ::: | :::  | OCOTP  |   |    |    |    |   •  |  •  |  •  |  •  |  •  |    |
| ::: | :::  | SAIF0  | SGTL5000  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |    |
| ::: | :::  | SSP0  | eMMC  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  | [[..:..:mba28:dip_switches#boot_medium_selection_s4_s5|boot device]]\\  TQMa28x Rev. ≥ 0202/TQMa28L Rev. ≥ 0103 have eMMC 5.0 devices assembled which are supported with BSP Rev. ≥ 0115\\ <wrap round important>A patch [[https://www.tq-embedded.com/content/download/13122/file/TQ-ARM-BSP-REV.0109_add_eMMC5.0_detection.zip|Linux BSP TQMaxx Rev.0109 - Fix eMMC 5.0 detection]] is available for BSP REV.0109</wrap>  |
| ::: | :::  | SSP1  | SD card  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  | [[..:..:mba28:dip_switches#boot_medium_selection_s4_s5|boot device]]  |
| ::: | :::  | SSP2  | | | | | | | | | | disabled in default pin multiplexing,\\ SS1 & SS2 used for USB overcurrent detection |
| ::: | :::  | SSP3  | | | | | | | | | | disabled in default pin multiplexing  |
| ::: | :::  | SWITCH  | 3-Port Ethernet Switch  |  •  |  ○  |  ○  |  ○  |  ○  |  ○  |  ○  |  ○  | <wrap round important>only available in platform tqma28-fsl</wrap>  |
| ::: | :::  | USB0  | Host  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  | mass storage, human interface devices  |
| ::: | :::  | :::  | OTG  |  •  |  •  |  •  |   •  |  ○  |  ○  |  ○  |  ○  | MBa28: Host mode only (USB_ID tied to GND)  |
| ::: | :::  | USB1  | Host  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  | mass storage, human interface devices  |
| ::: | LM73  | I2C1  | Temperature sensor  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |   |
| ::: | M24C64  | I2C1  | EEPROM  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |    |
| MBa28 | LM73  | | Temperature sensor  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |    |
| ::: | PCA9554D (0x20)  | GPO  | 8 x Output (X1)  |  •  |  •  |  •  |   •  |  •  |  •  |  •  |  •  |    |
| ::: | PCA9554D (0x21)  | GPI  | 4 x Input (X1)  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |    |
| ::: | :::  | USERLED  | 2 x LED  |  •  |  •  |  •  |   •  |  •  |  • |  •  |  •  |    |
| ::: | SGTL5000  | Audio Codec  | Audio Out  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |  •  |    |
| ::: | :::  | :::  | Microphone In  |    |    |    |     |    |    |    |    | <wrap round important>on request</wrap>  |
<wrap round info>Table primarily applies to platform **tqma28**, please see changelog for details on differences to platform **tqma28-fsl**</wrap>




===== FAQ =====

<WRAP round important>WORK IN PROGRESS</WRAP>


===== PTXdist =====
===== Version Matrix =====
\\
^ BSP revision  ^  ++ 0100 | [[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/arm/embedded-modul/_shared/TQC-ARM-BSP-REV0100.tar.gz|source]] \\ [[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/arm/embedded-modul/TQ-Socket/TQMa28/TQC_ARM_BSP-tqma28-fsl-REV0100.tgz|binaries]]++  ^  [[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/arm/embedded-modul/_shared/TQC-ARM-BSP.0101.zip|0101]]  ^^  [[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/arm/embedded-modul/_shared/TQC-ARM-BSP.0102.zip|0102]]  ^^  [[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/arm/embedded-modul/_shared/TQ-ARM-BSP.REV0106.zip|0106]]  ^^  [[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/arm/embedded-modul/_shared/TQ-ARM-BSP.REV0109.zip|0109]]  ^^  [[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/arm/embedded-modul/_shared/TQ-ARM-BSP-REV.0115.zip|0115]]  ^  [[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/arm/embedded-modul/_shared/TQ-ARM-BSP-REV.0117.zip|0117]]  ^  [[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/arm/embedded-modul/_shared/TQMaxx.BSP.SW.REV.0119.zip|0119]]  ^
^ ++PTXdist|\\ version required by BSP++  |  [[http://www.pengutronix.de/software/ptxdist/download/ptxdist-2012.04.0.tar.bz2|2012.04]]  |  [[http://www.pengutronix.de/software/ptxdist/download/ptxdist-2012.07.0.tar.bz2|2012.07]]  ||  [[http://www.pengutronix.de/software/ptxdist/download/ptxdist-2012.07.0.tar.bz2|2012.07]]  ||  [[http://www.pengutronix.de/software/ptxdist/download/ptxdist-2012.07.0.tar.bz2|2012.07]]  ||  [[http://www.pengutronix.de/software/ptxdist/download/ptxdist-2013.12.0.tar.bz2|2013.12.0]]  ||  [[http://www.pengutronix.de/software/ptxdist/download/ptxdist-2013.12.0.tar.bz2|2013.12.0]]  |  [[http://www.pengutronix.de/software/ptxdist/download/ptxdist-2016.04.0.tar.bz2|2016.04.0]]  |  [[http://www.pengutronix.de/software/ptxdist/download/ptxdist-2016.04.0.tar.bz2|2016.04.0]]  |
^ ++OSELAS Toolchain|\\ cf. [[http://www.pengutronix.de/software/ptxdist/appnotes/AppNote_BuildingToolchain.pdf|Building OSELAS.Toolchains()]]++  |  [[http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-2011.11.0.tar.bz2|2011.11]]  |  [[http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-2011.11.0.tar.bz2|2011.11]]  ||  [[http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-2011.11.0.tar.bz2|2011.11]]  ||  [[http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-2011.11.3.tar.bz2|2011.11.3]]  ||  [[http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-2013.12.2.tar.bz2|2013.12.2]] \\  [[http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-2011.11.3.tar.bz2|fsl: 2011.11.3]]  ||  [[http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-2014.12.2.tar.bz2|2014.12.2]]  |  [[http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-2014.12.2.tar.bz2|2014.12.2]]  |  [[http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-2014.12.2.tar.bz2|2014.12.2]]  |
^ Platform  |  tqma28-fsl  |  tqma28-fsl  |  tqma28  |  tqma28-fsl  |  tqma28  |  tqma28-fsl  |  tqma28  |  tqma28-fsl  |  tqma28  |  tqma28  |  tqma28  |  tqma28  |
^ U-Boot  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2009.08 ]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2009.08 ]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2012.10]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2009.08]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2012.10]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2009.08]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2013.04 ]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2009.08]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2013.04 ]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2015.07]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2015.07]]  |  [[http://www.denx.de/wiki/U-Boot/Documentation|2015.07]]  |
^ Linux Kernel  |  [[https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/?id=v2.6.35|2.6.35]]  |  [[https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/?id=v2.6.35|2.6.35]]  |  [[http://lxr.free-electrons.com/source/?v=3.5|3.5]]  |  [[https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/?id=v2.6.35|2.6.35]]  |  [[http://lxr.free-electrons.com/source/?v=3.5|3.5]]  |  [[https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/?id=v2.6.35|2.6.35]]  |  [[http://lxr.free-electrons.com/source/?v=3.10|3.10]]  |  [[https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/?id=v2.6.35|2.6.35]]  |  [[http://lxr.free-electrons.com/source/?v=3.14|3.14]]  |     [[http://lxr.free-electrons.com/source/?v=3.14|3.14.19]]  |  [[http://lxr.free-electrons.com/source/?v=3.14|3.14.19]]  |  [[http://lxr.free-electrons.com/source/?v=3.14|3.14.19]]  |
\\
<WRAP left round important 70%>
For new projects TQ strongly recommends to use the **tqma28** platform (mainline kernel).\\
However, if your project has requirements not yet supported by the **tqma28** platform (please check »Remarks« below), the **tqma28-fsl** platform (freescale kernel) may be an option.
</WRAP>
<WRAP clear></WRAP>
\\
<WRAP left round important 70%>
For new projects TQ strongly recommends to use the **tqma28** platform (mainline kernel).\\
However, if your project has requirements not yet supported by the **tqma28** platform (please check »Remarks« below), the **tqma28-fsl** platform (freescale kernel) may be an option.
</WRAP>
<WRAP clear></WRAP>

===== Changelog PTXdist =====

++++2017/07/07 -REV 0117|
**U-Boot v2015.07 - TQMa28/L**
  * mux i2c0 pins for boot eeprom
  * support spi-flash
  * fix VDDD brownout setting
  * do not enable batt measurement on 5v only
  * fix board_init
  * select correct bus for eeprom
  * fix usb power switching
  * fix phy address for fec1

**Linux v3.14.19 - TQMa28/L**
  * <none>
++++
++++2016/04/18 - REV 0115|
  *Remove tqma28-fsl support
  *Update iec61850 library
  *Update U-Boot to 2015.07
  *Update to Kernel 3.14.19
  *Updating OSELAS Toolchain

** Build tools **
  * OSELAS.Toolchain 2014.12.2

** U-Boot 2013.04 **
  *TQMa28L: default console is DUART
**U-Boot 2015.07 (based on U-Boot 2013.04)**
  *Fixed bitmask of GPIO bank and pin 
  *Fixed PHY address assignment
  *Fixed set_dsr command argv pointer

** Linux Kernel **
  *Enabled LED support
++++

++++2014/07/10 - REV 0109|

** Build tools **
  * ptxdist-2013.12.0
  * OSELAS.Toolchain-2013.12.2

** ptxdist 2013.12 **
    * TQMa28: add xenomai support
    * openssl: use 1.0.1h
    * TQMa28: minor fixes in kernelconfig

** TQMa28/28L-AB/28L-AA **
    * Linux version 3.14 (device tree)
      * add edtft5x06 to device tree
      * set correct audio codec clock
      * limit spi source clock

    * U-Boot 2013.04
      * add OCOTP driver
      * fix i2c speed
      * add module eeprom
      * remove network config & mac addr from default env
++++
=== 2014/07/02 - REV 0108 (internal) ===

=== 2014/06/06 - REV 0107 (snapshot) ===

++++ 2014/01/13 - REV 0106 |

** Build tools **
  * ptxdist-2012.07.0
  * OSELAS.Toolchain-2011.11.x (x - 1 ... 3)

** ptxdist 2012.07 **
  * compile images into profile for Freescale MfgTool
  * added SystemCorp IEC61850 demo
  * removed TQMa53 support/patches/system files
  * add TQMa28/28L readme file
  * Upgrade stressapptest version
  * removed systemd/ptxconfigs (only TQMa53)
  * delete 28/28L TODOs
  * delete systemd ptxconfigs (only TQMa53)
  * delete amd-gpu firmware (only TQMa53)

** TQMa28/28L-AB/28L-AA **
    * Linux version 3.10 (device tree) (3.10-tq-arm-bsp-0105)
      * Qualified pin setup
      * USB Overcurrent Protection enabled
      * Login as non-root user allowed
      * add support for MMC SETDSR command
      * add proprietary device tree option to setup e-MMC DSR
      * remove hard-code enet_clk output enable

    * U-Boot 2013.04 (new) (2013.04-tq-arm-bsp-0105)
      * Qualified pin setup
      * Boot from 5V only
      * Support e-MMC > 2GB
      * Remove 120s pause when kernel has no network cable connected
      * Command to burn MAC-Address into OCOTP fuses (otp_mxs)
      * reorder gpio setup order
      * fixed overflow issue on MAC incrementation for ETH1
      * add support for MMC SETDSR command
      * qualified setting of e-MMC drive strength register
      * propagate setting of e-MMC DSR to kernel via device tree modification
      * made enet_clk output driver selectable
      * propagate enet_clk driver selection to kernel via device tree modification

** TQMa28-fsl **
    * Linux version 2.6.35 (2.6.35.14-tq-arm-bsp-0105)
      * reorder gpio setup order
      * Qualified pin setup
      * remove hard-code enet_clk output enable
      * check for command line option to enable internal enet_clk driver
      * check for command line option to set e-MMC drive strength register

    * U-Boot 2009.08 (2009.08-tq-arm-bsp-0105)
      * fix udelay duration
      * reorder gpio setup order
      * Qualified pin setup
      * enable reading FEC MAC address from fuses
      * add support for MMC SETDSR command
      * qualified setting of e-MMC drive strength register
      * propagate setting of e-MMC DSR to kernel via command line modification
      * made enet_clk output driver selectable
      * propagate enet_clk driver selection to kernel via command line modification

** TQMa335x **
    * Linux version 3.2
    * U-Boot 2013.07
++++

[REV0105 - internal testing stage]

[REV0104.5 - U-Boot 2013.04 for production, no change to REV0105]

[REV0104 skipped - internal development]

[REV0103 skipped - tag error in git repository]

++++ 2013/05/13 - REV 0102 |
---------------------

Buildenvironment:
	- ptxdist-2012.07.0
	- OSELAS.Toolchain-2011.11.x (x - 1 ... 3)

News
	- TQMa35:
		- Linux version 3.2.40
		- Fixes:
      - backport USB bugfixes
		- Features:
		  - allow to build TQMa35 / MBa35 for AA and AB hardware in a single project
		  - support for TQMa35 on MBa35-CA Baseboard

	- TQMa28:
		- Linux version 3.5 (device tree)
		- Fixes:
		  - bugfixing linux kernel

	- TQMa28-fsl:
		- Linux version 3.5 (device tree)
		- Fixes:
		  - bugfixing linux kernel + u-boot 

	- TQMa28L (prerelease):
		- Linux version 3.5 (device tree)
		- U-Boot 2012.10
		- Fixes:
		  - bugfixing linux kernel
++++

++++ 2013/01/10 - REV 0101|
---------------------
New:
	- ptxdist-2012.07.0
	- OSELAS.Toolchain-2011.11.x
	  -> .2, .3 usable;
	  -> .1 has known issue with zlib package

	- TQMa35:
		- Linux version 3.2.28
		- u-Boot 2010.06
		- Features:
			- allow all patchlevels of toolchain
			- switch to ptxdist 2012.07

	- TQMa28:
		- Linux version 3.5 (device tree)
		- Features:
			- switch to ptxdist 2012.07
			- allow all patchlevels of toolchain
			- remove unneeded gpios (gpio2_12, gpio2_13, gpio2_15, gpio3_5)
			- AUART3
			- MX28 RTC
			- PWM Backlight
			- LCDIF (FG0700, ETV570)
			- USB (host/otg/gadget:storage,serial)
			- MMC slotindex patch
			- MMC (as non-removable)
			- SD (removable)
			- FEC0, FEC1
			- MXS touchscreen
			- I2C
			- LM73 temp.sensor
			- 24c64 eeprom
			- Enabled module support

	- TQMa28:
		- U-Boot 2012.10
		- Features:
			- ptxdist includes imx-bootlets for 2009.08 only
			- Use TQMa28 machine id
			- AUART3
			- cmd_mmc.c: print current device name on boot
			- mxs_i2c: i2c base addr configurable
			- LM73 temp.sensor
			- I2C
			- 24c64 eeprom
			- GPIO
			- MII
			- MMC (as non-removable)
			- SD (removable)
			- FEC0, FEC1: ping/tftp/dhcp
			- USB (storage)
			- RTC (32768 Hz quartz)
			- RAM speed 196 MHz
			- Remove unneeded GPIOs
			- don't register fec0 phy power enable (gpio2_15)
			- fixed install script error
			- VDDD 1.55V and BO 1.45V


	- TQMa28:
		- Linux version 2.35.14 + fsl
		- u-Boot 2009.08 + fsl
		- Features:
			- switch to ptxdist 2012.07
			- allow all patchlevels of toolchain
			- RootFS size to 64 MiB
			- increase kernel patch level to .14
			- U-Boot: boot first image after firmware install
			- U-Boot: Use TQMa28 machine id
			- U-Boot: remove setup of unneeded pins (gpio2_15)
			- U-Boot: install rootfs larger than 96MB
			- U-Boot: (imx-bootlets) RAM speed 196 MHz
			- U-Boot: (imx-bootlets) VDDD 1.55V and BO 1.45V
			- U-Boot: fixed install script calc error
			- Kernel: enable 2nd FEC
			- Kernel: don't register mmc wp pin (gpio2_12)
			- Kernel: don't register fec0 phy power enable (gpio2_15)
			- Kernel: Use TQMa28 machine id
			- Kernel: Use Freescale 5V stability patch (and more fsl patches)
			- Kernel: Enable power on both usb ports 0 and 1
			- Kernel: Disable CPUFREQ support (due to hangs on mainline uboot)
			- Kernel: Re-enabled module support
++++

++++ 2012/09/26 - REV 0100|
---------------------
New:
	- ptxdist-2012.04.0
	- OSELAS.Toolchain-2011.11.1

	- TQMa35:
		- Linux version 3.2.28
		- u-Boot 2010.06
		- Features:
			- mx3fb display and backlight support (optional LVDS)
			- I2C controller
			- eSDHC0/1 controller
			- UART support
			- USB OtG HS Host
			- USB HS Host (via ULPI Phy)
			- I2C EEPROM access
			- I2C Master
			- I2C temperature sensor LM75 read
			- I2C RTC (DS1339) support
			- I2C PCA9554 IO-Expander support(MBa35 only)
			- SPI master
			- SPI Touchcontroller ADS7846 (MBa35 only)
			- FEC, 10/100 Mbit/s, fullduplex
			- SMC911x, 10/100 Mbit/s, fullduplex(MBa35 only)
			- FlexCAN driver

	- TQMa28:
		- Linux version 2.35.13 + fsl
		- u-Boot 2009.08 + fsl
		- Features:
			- display and backlight support
			- I2C controller
			- SD-Card / eMMC
			- UART / DUART support
			- USB Host / USB OTG Host
			- I2C EEPROM access
			- I2C temperature sensor LM75 read
			- RTC support
			- I2C PCA9554 IO-Expander support(MBa28 only)
			- SPI master
			- MXS Touchcontroller
			- Ethernet
			- CAN driver
++++



===== DevHost =====



===== Compilation =====


===== Adapt BSP =====
===== Deployment PTXdist =====
===== Images PTXdist =====
===== Downloads =====
===== How-To PTXdist =====
===== Known Issues PTXdist =====



===== Yocto =====
==== DevHost ====
==== Build BSP ====
==== Adapt BSP ====
==== Deployment ====
==== Known Issues Yocto ====
{{section>.:data#known_issues_ptxdist&noheader}}
===== (Deployment) =====
====== QNX BSP ======
===== U-Boot =====
===== Bootloader =====
==== Supported features ====


 
\\
==== Supported boot devices ====


===== Operating System =====

===== Onboard I2C devices =====

===== Kernel =====
===== FAQ =====
===== Deployment =====
====== VxWorks BSP ======
===== U-Boot =====
===== Kernel =====
===== FAQ =====
===== Deployment =====