~~NOCACHE~~
{{template>intern:templates:tabs_wince_bootstrap|lang="intern"|mod_name="tqma28"|mod_name_head="TQMa28"|mod_arch="arm"|bsp_name="windows_ce"|bsp_name_head="Windows CE"}}
\\
\\
===== Overview =====

====== BSP / Hardware compatibility ======

<WRAP round important>The Windows CE BSP only compatible to TQMa28 Module Revision ≤ 0202</WRAP>

====== Current versions & features ======
**Eboot**
==== Features ====
^Component ^ Status ^ Remarks ^
| CPU              |  +  |  |
| Ethernet         |  +  |  |
| <wrap round info>Key: + tested %%|%% - untested %%|%% ? open</wrap> |||

**Windows CE 6.0**
==== Features ====
^ Components ^ Status ^ Comments^
| Boot | + | from eMMC and SD-Card|
| Ethernet | + |  |
| eMMC | + |  |
| ext. SD | + |  |
| Display | + |  FG0700K5DSSWBG01  |
|  :::    | ::: |   CLAA070LC0ACW  |
|  :::    | ::: |   ET0350G0DH6  |   
| Touch | + |  |
| USB | + | HID and Masstorage |
| Sound | + | |
| EEPROM | + |  |
| CAN | + |  |
| DUART | + |  |
| GPIO | + |  |
| AUART0 | + |  |
| AUART1 | + |  |
| AUART2 | + | not connected  |
| AUART3 | + |  |
| AUART4 | + |  |
| Akku/Goldcap | - |  |
| Buzzer | + | |
| <wrap round info>Key: + tested %%|%% - untested %%|%% ? open</wrap> |||

----


==== Changelog ====
\\
== Version 2.22 -15.06.14 ==

  * fixed eboot issue downloading Image via Enet2
  * fixed EEPROM-MAC-address
  * added WRMac as an application
  * GPIO - Pindriver

== Version 2.20 - 15.01.14 ==

  * internal / external Ethernet-Phy has settable clocks now
  * supporting eMMC above 2 GB


== Version 2.12 - 26.06.13 ==

  * support for 10 and 100 MBIT Ethernet,Hotplug support
  * fixed UpdateImg.exe - Image update out of the running operation


== Version 2.10 - 04.12.12 ==

  * patch for PMIC
  * speed up system boot
  * show splash over the whole boot process
  * supporting SDHC

== Version 2.02 - 08.07.12 ==

  * support for reading MAC addresses from EEPROM
  * EEPROM addresses 0 - 0x60 could not used for application any more (not writeable)
  * added demo application "WriteMAC"

== "WriteMAC" program process ==

  * check eboot menu point 6 for programmed MAC address in eboot
  * if MAC address is not set  -> read from EEPROM )
  * set MAC address

  * check registry for MAC addresses settings in the system image
  * if MAC is not set in registry, MAC address will be setup from eboot 

== Version 2.01 - 25.06.12 ==

  * 10 / 100 Ethernet auto negotation work (no hot plug support)
  * changed power settings in XLDR + debug messages from power register in Main() of system image 
  * configured USB Actve-Sync to predefined COM port
  * SD-2 interface could be deactivated, eMMC stays active
  * added CLICK (Buzzer)
  * version is shown in eboot
  * added CAN Stack

== Handling ==

  * source + binary - BSP as installer - package



  * binary image = test image out of the BSP binarys