{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqma335xl"|mod_name_head="TQMa335xL"|mod_arch="arm"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}}
\\

===== Starterkit Interfaces and Functions =====

{{template>en:templates:howto:audio|microphone="X19"|linein="X20"|lineout="X21"|mbname="MBa335x"}}

{{template>en:templates:howto:buttons|description="There are three GPIO buttons on the MBa335x."|image="{{:en:arm:tqma335x:linux:yocto:tqma335x_gpio-button.png?nolink&400 \|}}"|device="/sys/class/gpio/"}}

{{template>en:templates:howto:can|dipdescription="DIP switch S3 is used to configure the CAN interfaces CAN0 and CAN1."|dip1="S3-1"|dip2="S3-2"|image="{{ :en:arm:tqma335x:linux:yocto:tqma335x_can_loopback.png?nolink&400 \|}}"}}

{{template>en:templates:howto:ethernet|description="The STKa335xL Starterkit provides two Gigabit Ethernet interfaces."|ubootdescription="In U-Boot eth0 is configured as default interface. The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="Both Ethernet interfaces are activated and configured by systemd-network. The configuration file for the eth0 interface is located in /lib/systemd/network/ these configuration file can be altered to customize the default interface configuration."|table="\| eth0  \| 10-eth0.network  \|"}}


{{template>en:templates:howto:i2c|module="tqma335xl"|mod_arch="arm"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:temperature|description="There is one temperature sensor located on the STKa335xL, you can read them with the following command:"|sensors="cat /sys/devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0019/hwmon/hwmon0/temp1_input"}}

{{template>en:templates:howto:usb|}}