{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="intern"|mod_name="tqma57xx"|mod_name_head="TQMa57xx"|mod_arch="arm"|bsp_name="linux"|build_system="yocto"|build_system_head="Yocto"|bsp_name_head="Linux"}}

===== Starterkit Interfaces and Functions =====

{{template>en:templates:howto:can|dipdescription="DIP switches SW3 and SW4 are used to configure the CAN interfaces CAN0 and CAN1."|dip1="SWx-1"|dip2="SWx-2"|image="{{ :en:arm:tqma57xx:linux:yocto:tqma57xx_can_loopback.png?nolink&400 \|}}"}}

{{template>en:templates:howto:ethernet|description="The STKa57Xx Starterkit provides two Gigabit and two 10/100 Mbit Ethernet interfaces."|ubootdescription="In U-Boot eth0 is configured as default interface. The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="All Ethernet interface are activated and configured by systemd-network. The configuration files for the eth0 interface is located in /lib/systemd/network/ these configuration file can be altered to customize the default interface configuration."|table="\| eth0  \| 10-eth0.network  \|"}}


{{template>en:templates:howto:i2c|module="tqma57xx"|mod_arch="arm"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:spi|mbname="MBa57xx"|amountspi="one"|table="\| SPI1\| /dev/spidev1.0  \|"|bridges="* SPI1: bridge between X56_43 (SPI1_D1) and X56_44 (SPI1_D0)"}}

{{template>en:templates:howto:temperature|description="There is one temperature sensor located on the STKa57xx, you can read them with the following command:"|sensors="cat /sys/devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48070000.target-module/48070000.i2c/i2c-0/0-001f/hwmon/hwmon0/temp1_input"}}

{{template>en:templates:howto:usb|}}

{{template>en:templates:howto:userled|description="The MBa57xx has two user controllable LEDs, the behavior of these LEDs can be selected by several triggers."|image="{{ :en:arm:tqma57xx:linux:yocto:mba57xx_user_led.png?nolink&400 \|}}"|location="/sys/devices/platform/leds/leds/"|example="/sys/class/leds/out0/trigger"}}