{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqma65xx"|mod_name_head="TQMa65xx"|mod_arch="arm"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}}
\\  
===== Starterkit Interfaces and Functions =====


{{template>en:templates:howto:can|dipdescription="DIP switches SW2 and SW3 are used to configure the CAN interfaces CAN0 and CAN1."|dip1="SWx-1"|dip2="SWx-2"|image="{{ :en:arm:tqma65xx:linux:yocto:tqma65xx_can_loopback.png?nolink&400 \|}}"}}

{{template>en:templates:howto:ethernet|ubootdescription="The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="The Ethernet interface is activated and configured by systemd-network. The configuration file for the eth0 interface is located in /lib/systemd/network/ these configuration file can be altered to customize the default interface configuration."|table="\| eth0  \| 10-eth0.network  \|"}}

{{template>en:templates:howto:i2c|module="tqma65xx"|mod_arch="arm"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:temperature|description="There is one temperature sensor located on the STKa65xx, you can read them with the following command:"|sensors="cat /sys/devices/platform/bus@100000/bus@100000:bus@28380000/bus@100000:bus@28380000:bus@42040000/42120000.i2c/i2c-0/0-001f/hwmon/hwmon0/temp1_input"}}

{{template>en:templates:howto:usb|}}

{{template>en:templates:howto:userled|description="The MBa65xx has two user controllable LEDs, the behavior of these LEDs can be selected by several triggers."|image="{{ :en:arm:tqma65xx:linux:yocto:mba65xx_user_led.png?nolink&400 \|}}"|location="/sys/devices/platform/leds/leds/"|example="/sys/class/leds/led1/trigger"}}