{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="intern"|mod_name="tqma7x"|mod_name_head="TQMa7x"|mod_arch="arm"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}}

===== Starterkit Interfaces and Functions =====

{{template>en:templates:howto:audio|microphone="X19"|linein="X20"|lineout="X21"|mbname="MBa7x"|dipdescription="DIP switch S5 is used to configure the CAN interfaces CAN0 and CAN1."|dip1="S5-1"|dip2="S5-2"|image="{{ :en:arm:tqma7x:linux:yocto:tqma7x_can_loopback.png?nolink&400 \|}}"}}

{{template>en:templates:howto:ethernet|description="The STKa7x Starterkit provides two Gigabit Ethernet interfaces."|ubootdescription="In U-Boot eth0 is configured as default interface. The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="Both Ethernet interfaces are activated and configured by systemd-network. The configuration files for interfaces are located in /lib/systemd/network/ these configuration files can be altered to customize the default interface configuration."}}


{{template>en:templates:howto:i2c|module="tqma7x"|mod_arch="arm"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:lvds|starterkit="STKa7x"|example="<device tree>'' (e.g. ''setenv fdt_file imx7d-mba7-lvds.dtb'')"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:spi|mbname="MBa7x"|amountspi="two"}}


{{template>en:templates:howto:temperature|description="There are three temperature sensors located on the STKa7x, you can read them with the following commands:"}}

{{template>en:templates:howto:usb|}}


{{template>en:templates:howto:userled|description="The MBa7x has two user controllable LEDs, the behavior of these LEDs can be selected by several triggers."|image="{{ :en:arm:tqma7x:linux:yocto:mba7x_user_led.png?nolink&400 \|}}"|location="/sys/devices/soc0/gpio-leds/leds"|example="/sys/class/leds/led1/trigger"}}