===== Starterkit Interfaces and Functions =====

{{template>en:templates:howto:audio|description="The microphone is not supported with the current BSP version."|microphone="X15"|linein="X16"|lineout="X17"|mb_name="MBA8MPxL"}}

{{template>en:templates:howto:buttons|description="There are two GPIO button on the MBa8MPxL. They are bound to the gpio-keys driver, and can be tested with the evtest tool."|image="{{ :en:arm:tqma8mpxl:linux:yocto:tqma8mpxl_gpio-button.png?nolink&400 \|}}"|device="/dev/input/event1"|test="evtest /dev/input/event1"}}

{{template>en:templates:howto:can|dipdescription="DIP switch S10 is used to configure the CAN interfaces CAN0 and CAN1."|dip1="S10-1"|dip2="S10-2"|image="{{ :en:arm:tqma8mpxl:linux:yocto:tqma8mpxl_can_loopback.png?nolink&400 \|}}"}}


{{template>en:templates:howto:ethernet|description="The TQMa8MPxL Starterkit provides two Gigabit Ethernet interfaces."|ubootdescription="In U-Boot eth0 is configured as default interface. The IP configuration can be done statically or by a DHCP server in the network.."|linuxdescription="Both Ethernet interfaces are activated and configured by systemd-networkd. The configuration files for the interfaces are located in /lib/systemd/network/ these configuration files can be altered to customize the default interface configuration."}}

{{template>en:templates:howto:gpu|}}

{{template>en:templates:howto:i2c|module="tqma8mpxl"|mod_arch="arm"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:lvds|starterkit="STKa8MPxL"|example="imx8mp-mba8mpxl-lvds-tm070jvhg33.dtb''"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:spi|mbname="MBa8MPxL"|amountspi="two"}}

{{template>en:templates:howto:temperature|description="There are two temperature sensors located on the STKa8MPxL, you can read them with the following command:"}}

{{template>en:templates:howto:usb|}}

{{template>en:templates:howto:userled|description="The MBa8MPxL has three user controllable LEDs, the behavior of these LEDs can be selected by several triggers."|image="{{ :en:arm:tqma8mpxl:linux:yocto:mba8mpxl_user_led.png?nolink&300 \|}}"|location="/sys/devices/platform/gpio-leds/leds/"|example="/sys/class/leds/led2/trigger"}}