{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="intern"|mod_name="tqma8mx"|mod_name_head="TQMa8Mx"|mod_arch="arm"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}}

===== Starterkit Interfaces and Functions =====


{{template>en:templates:howto:buttons|description="There are three GPIO buttons on the MBa8Mx. They are bound to the gpio-keys driver, and can be tested with the evtest tool."|image="{{ :en:arm:tqma8mxnl:linux:yocto:tqma8mxnl_gpio-button.png?nolink&400 \|}}"|device="/dev/input/event0"|test="evtest /dev/input/event0"}}

{{template>en:templates:howto:ethernet|description="The STKa8Mx Starterkit provides one Gigabit Ethernet interfaces."|ubootdescription="The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="The Ethernet interface is activated and configured by systemd-network. The configuration file for the interface is located in /lib/systemd/network/ these configuration file can be altered to customize the default interface configuration."|table="\| eth0  \| 10-eth0.network  \|"}}

{{template>en:templates:howto:i2c|module="tqma8mx"|mod_arch="arm"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:spi|mbname="MBa8Mx"|amountspi="two"}}


{{template>en:templates:howto:temperature|description="There are two temperature sensors located on the STKa8Mx, you can read them with the following commands:"}}

{{template>en:templates:howto:usb|}}

{{template>en:templates:howto:userled|description="The MBa8Mx has two user controllable LEDs, the behavior of these LEDs can be selected by several triggers."|image="{{ :intern:arm:tqma8mx:linux:yocto:mba8mx_user_led.png?nolink&400 \|}}"|location="/sys/devices/platform/gpio-leds/leds/"|example="/sys/class/leds/led1/trigger"}}