WORK IN PROGRESS ====== MBa8Xx DIP switch settings ====== ^ S1 ^^^^^^ ^ {{ :en:arm:tqma8xx:mba8xx:mba8xx_s1_sd.png?nolink&100 |}}|||||| ^ DIP | 1 ^ 2 ^ 3 ^ 4 | ^ ON | | | • | • | ^ OFF | • | • | | | ^ S1 ^^^^^^ ^ {{ :en:arm:tqma8xx:mba8xx:mba8xx_s1_emmc.png?nolink&100 |}}|||||| ^ DIP | 1 ^ 2 ^ 3 ^ 4 | ^ ON | | | • | | ^ OFF | • | • | | • | ^ S1 ^^^^^^ ^ {{ :en:arm:tqma8xx:mba8xx:mba8xx_s1_qspi_nor.png?nolink&100 |}}|||||| ^ DIP | 1 ^ 2 ^ 3 ^ 4 | ^ ON | | • | • | | ^ OFF | • | | | • | ^ S1 ^^^^^^ ^ {{ :en:arm:tqma8xx:mba8xx:mba8xx_s1_serial_downloader.png?nolink&100 |}}|||| ^ DIP ^ 1 ^ 2 ^ 3 ^ 4 | ^ ON | | | | • | ^ OFF | • | • | • | | ^ S1 ^^^^^^ ^ {{ :en:arm:tqma8xx:mba8xx:mba8xx_s1_fuses.png?nolink&100 |}}|||| ^ DIP ^ 1 ^ 2 ^ 3 ^ 4 | ^ ON | | | | | ^ OFF | • | • | • | • | =====DSI-to-DP-Bridge (S9)===== Only available on MBa8Xx Rev.01xx. ^ DIP ^ OFF (default) ^ ON ^ | S9 | use LVDS interface | enable DSI-to-DP-Bridge | ===== CAN configuration (S7) ===== DIP switch S7 is used to configure the CAN interfaces CAN1 and CAN2. ==== Termination ==== ^ DIP ^ OFF (default) ^ ON ^ | S7-1 | CAN0 not terminated | CAN0 interface terminated (120Ω) | | S7-2 | CAN1 not terminated | CAN1 interface terminated (120Ω) |