====== MBLS102xA DIP switch settings ======

<WRAP round important>WORK IN PROGRESS</WRAP>

===== Boot Device Selection (S3) =====
To select the desired boot medium set the DIP switches S3, S9 accordingly

==== SD card ====
<wrap round important 60%>only for TQMLS102xA <wrap em>without eMMC</wrap></wrap>

^ |:::  ^  S3  ||||
^ |:::  ^  {{ :intern:arm:tqmls102xa:mbls102xa:dip_4_1100_2.png?nolink&60 |}}  |||| 
^  DIP  |::: ^  1  ^  2  ^  3  ^  4  |
^  ON  |:::|  •  |  •  ^  ^  ^       
^  OFF  |:::|  |    ^ ^ ^    
\\



==== eMMC ====
<wrap round info 40%> eMMC is a placement option on TQMLS102xA</wrap>

^ |:::  ^  S3  ||||
^ |:::  ^  {{ :intern:arm:tqmls102xa:mbls102xa:dip_4_1000_2.png?nolink&60 |}}  ||||   
^  DIP  |::: ^  1  ^  2  ^  3  ^  4  |
^  ON  |:::|  •  |    ^  ^  ^
^  OFF  |:::|  |  •  ^  ^  ^   
\\
==== QSPI ====
^ |:::  ^  S3  ||||
^ |:::  ^  {{ :intern:arm:tqmls102xa:mbls102xa:dip_4_0x00_2.png?nolink&60 |}}  ||||   
^  DIP  |::: ^  1  ^  2  ^  3  ^  4  |
^  ON  |:::|    |  °((TQMLS102xA without eMMC))  ^ ^ ^
^  OFF  |:::|  •  |  °((TQMLS102xA with eMMC))  ^ ^ ^   
\\

===== CPLD Function Selection (S9) =====
\\
==== S9 DIP switch 1 + 2 ====


^  S9  ^  DIP 1  ^  DIP 2  ^ 
^  HDMI  |  ON  |  ON  |
^  LVDS  |  OFF  |  ON  |
^  UCC  |  ON  |  OFF  | 
^  LVDS_RGBINV  |  OFF  |  OFF  |
\\



==== S9 DIP switch 3 + 4 ====


^  S9  ^  DIP 3 ^  DIP 4  ^  
^  EC1  |  ON  |  ON  |
^  CAN1 / CAN2  |  OFF  |  ON  |
^  SAI1 / SAI2  |  ON  |  OFF  |
^  Reserved  |  OFF  |  OFF  |
\\


<WRAP round important> The settings of DIP S9 has to match the TQMLS102xA BSP RCW configuration.</WRAP>  

<WRAP round info>CPLD mux mode #1 EC1_HDMI matches the default RCW configuration of the TQMLS102xA BSP.\\
If DIP S9 is not set to one of the CPLD mux modes #1 - #12, the CPLD firmware selects mux mode #1. </WRAP>


^  Function  ^  S9-1  ^  S9-2  ^  S9-3  ^ S9-4  ^ 
^ #1  EC1 + HDMI  |  ON  |  ON  |  ON  |  ON  |  
^ #2  EC1 + LVDS  |  OFF  |  ON  |  ON  |  ON  |
^ #3  EC1 + UCC  |  ON  |  OFF  |  ON  |  ON  |
^ #4  EC1 + LVDS_RGBINV  |  OFF  |  OFF  |  ON  |  ON  |
^ #5  CAN + HDMI  |  ON  |  ON  |  OFF  |  ON  |
^ #6  CAN + LVDS  |  OFF  |  ON  |  OFF  |  ON  |
^ #7  CAN + UCC  |  ON  |  OFF  |  OFF  |  ON  |
^ #8  CAN + LVDS_RGBINV  |  OFF  |  OFF  |  OFF  |  ON  | 
^ #9  SAI + HDMI  |  ON  |  ON  |  ON  |  OFF  |
^ #10 SAI + LVDS  |  OFF  |  ON  |  ON  |  OFF  |
^ #11 SAI + LVDS  |  ON  |  OFF  |  ON  |  OFF  |
^ #12 SAI + LVDS_RGBINV  |  OFF  |  OFF  |  ON  |  OFF  |
^ #13 - #16 reserved  ^ ^ |  OFF  |  OFF  |

===== CAN configuration (S2) =====
DIP switch S2 is used to configure the CAN interfaces CAN0 and CAN1.\\
\\
{{:intern:arm:tqmls102xa:mbls102xa:mbls102xa.0201_can.jpg?nolink&400|}}
<WRAP centeralign half column>
==== Termination ====
^ DIP  ^ OFF (default)  ^  ON  ^
| S2-1 |  CAN0 not terminated  | CAN0 terminated (120Ω) |
| S2-2 |  CAN1 not terminated  | CAN1 terminated (120Ω) |
</WRAP>
<WRAP clear></WRAP>

===== RS485 configuration (S1) =====
DIP switch S1 is used to configure the RS485 interface.\\
\\
{{:intern:arm:tqmls102xa:mbls102xa:mbls102xa.0201_rs485.jpg?nolink&400|}}
<WRAP centeralign half column>
==== Termination ====
^ DIP  ^ OFF (default)  ^  ON  ^
| S1-1 |  RS485 RxD not terminated  | RS485 RxD terminated (120Ω) |
| S1-2 |  RS485 TxD not terminated  | RS485 TxD terminated (120Ω) | 
</WRAP>