====== Configuration EEPROM ======

Most TQ modules are equipped with a so called "Configuration EEPROM", which holds some essential module specific data.
<WRAP round alert 60%>
Unless explicitly instructed to do so, TQ strongly recommends to not modify this "Module Specific Data Block (MSDB)".\\ 
Improper modifications may render the module unbootable.
</WRAP>

However, the unused part of the EEPROM starting at offset 0x80 is available for use by customers.

The following table shows the structure of the "Module Specific Data Block (MSDB)":
^ Offset ^ Payload  ^ Padding  ^ Size ^ Type   ^ Description                          ^ 
|0x00  |variable|variable|32  |binary|Hard Reset Configuration Word (HRCW)|
|0x20  |6       |10      |16  |binary|MAC Address                         |
|0x30  |8       |8       |16  |ASCII |Serial number                       |
|0x40  |variable|variable|64  |ASCII |TQ Long         |

<WRAP round tip 60%>
Please note that some TQ modules also provide a second, so called "Data EPPROM".\\ 
This EEPROM is intended to be used exclusively by the customer's application.
</WRAP>