==== QNX ====



=== Release Notes ===
  * 18.12.2014 Ver. 1.0
  * Tested with TQMa6Q-AA on MBa6x0200 (U-Boot 2013.04-20140718)
  * QNX 6.6.0
  * UART2,3,4,5
  * Ethernet1 on X11 (1GBit/s)
  * USB Host
  * I2C 1,3
  * SD Card
  * eMMC
  * 7" WVGA Display ETM0700G0DH6 (QNX screen graphics with Open GL ES gears demo)
  * Touch FT5x (Display ETM0700G0DH6) 
  * RTC DS1339
  * Watchdog

=== U-Boot Environment ===
<code>  
 setenv qnx_ram_addr 0x10800000
 setenv qnx_mmc_sect 0x84000
 setenv qnx_mmc_blks 0x281F
 setenv qnx_load 'mmc read ${qnx_ram_addr} ${qnx_mmc_sect} ${qnx_mmc_blks}'
 setenv qnx_boot 'go ${qnx_ram_addr}'
 setenv qnx run qnx_load qnx_boot
 setenv bootcmd run qnx
 saveenv
</code>
=== QNX Image von TFTP auf SD/eMMC laden ===
<code>
 tftp ${qnx_ram_addr} tqma6.ifs
 mmc write ${qnx_ram_addr} ${qnx_mmc_sect} ${qnx_mmc_blks}
</code>