WORK IN PROGRESS {{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqmls1028A"|mod_name_head="TQMLS1028A"|mod_arch="layerscape"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}} \\ ===== Starterkit Interfaces and Functions ===== {{template>en:templates:howto:buttons|description="There are two GPIO buttons on the MBL1028A. They are bound to the gpio-keys driver, and can be tested with the evtest tool."|image="{{ :en:layerscape:tqmls1028a:linux:yocto:tqmls1028a_gpio-button.png?nolink&400 \|}}"|device="/dev/input/event0"|test="evtest /dev/input/event0"}} {{template>en:templates:howto:can|dipdescription="DIP switch S1 is used to configure the CAN interfaces CAN0 and CAN1."|dip1="S1-1"|dip2="S1-2"|image="{{ :en:layerscape:tqmls1028a:linux:yocto:tqmls1028a_can_loopback.png?nolink&400 \|}}"}} {{template>en:templates:howto:ethernet|description="The STKLS1028A Starterkit provides four Gigabit interfaces."|ubootdescription="The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="The configuration file for the eth0 interface is located in /lib/systemd/network/ these configuration file can be altered to customize the default interface configuration."|table="\| eth0 \| 10-eth0.network \|"}} {{template>en:templates:howto:i2c|module="tqmls1028a"|mod_arch="layerscape"|ubooti2c="[0,2]"|linuxi2c="[0,2]"}} {{template>en:templates:howto:rtc|}} {{template>en:templates:howto:temperature|description="There are two temperature sensors located on the STKLS1028A, you can read them with the following commands:"}} {{template>en:templates:howto:usb|}} {{template>en:templates:howto:userled|description="The MBLS1028A has two user controllable LEDs, the behavior of these LEDs can be selected by several triggers."|image="{{ :en:layerscape:tqmls1028a:linux:yocto:mbls1028a_user_led.png?nolink&400 \|}}"|location="/sys/devices/platform/gpio-leds/leds/"|example="/sys/class/leds/led1/trigger"}}