{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqmls102xa"|mod_name_head="TQMLS102xA"|mod_arch="layerscape"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}}
\\  
\\
===== Starterkit Interfaces and Functions =====

{{template>en:templates:howto:can|dipdescription="DIP switch S2 is used to configure the CAN interfaces CAN0 and CAN1."|dip1="S2-1"|dip2="S2-2"|image="{{ :en:layerscape:tqmls102xa:linux:yocto:tqmls102xa_can_loopback.png?nolink&400 \|}}"}}

{{template>en:templates:howto:ethernet|description="The STKLS102xA Starterkit provides three Gigabit interfaces."|ubootdescription="The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="The configuration files for the eth0 interface and the eth1 interface are located in /lib/systemd/network/ these configuration files can be altered to customize the default interface configuration."}}


{{template>en:templates:howto:i2c|module="tqmls102xa"|mod_arch="layerscape"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:temperature|description="There are two temperature sensors located on the STKLS102xA, you can read them with the following commands:"}}

{{template>en:templates:howto:usb|}}