~~NOTOC~~
~~NOCACHE~~ 
{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqmls10xxA"|mod_name_head="TQMLS10xxA"|mod_arch="layerscape"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}}
\\  

===== Starterkit Interfaces and Functions =====

{{template>en:templates:howto:buttons|description="There are two GPIO buttons on the MBLS10xxA. They are bound to the gpio-keys driver, and can be tested with the evtest tool."|image="{{ :en:layerscape:tqmls10xxa:linux:yocto:tqmls10xxa_gpio-button.png?nolink&400 \|}}"|device="/dev/input/event0"|test="evtest /dev/input/event0"}}


{{template>en:templates:howto:ethernet|description="The STKLS10xxA Starterkit provides four Gigabit and two 10 Gigabit Ethernet interfaces."|ubootdescription="In U-Boot FM1@SEC3 is configured as default interface. The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="In Linux you have to enable the ethernet interfaces with ''ip link set dev fm1-mac\[2,3,4,9] up''. The IP configuration can be done statically or by a DHCP server in the network"}}


{{template>en:templates:howto:i2c|module="tqmls10xxa"|mod_arch="layerscape"|ubooti2c="[0,2,3]"|linuxi2c="[0,1,2,3]"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:temperature|description="There is one temperature sensor located on the STKLS10xxA, you can read them with the following command:"|sensors="cat /sys/devices/platform/soc/2180000.i2c/i2c-0/0-0018/hwmon/hwmon0/temp1_input"}}

{{template>en:templates:howto:usb|}}


{{template>en:templates:howto:userled|description="The MBLS10xxA has one user controllable LEDs, the behavior of these LED can be selected by several triggers."|table="\| V78  \| led:user \| green  \| /sys/class/leds/led\:user/trigger  \|"|image="{{ :en:layerscape:tqmls10xxa:linux:yocto:mbls10xxa_user_led.png?nolink&400 \|}}"|location="/sys/devices/platform/leds/leds/"|example="/sys/class/leds/led\:user/trigger"}}