Work in Progress {{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqmlx2160a"|mod_name_head="TQMLX2160A"|mod_arch="layerscape"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}} ===== Starterkit Interfaces and Functions ===== {{template>en:templates:howto:buttons|description="There are two GPIO buttons on the MBLX2160A. They are bound to the gpio-keys driver, and can be tested with the evtest tool."|image="{{ :en:layerscape:tqmlx2160a:linux:yocto:tqmlx2160a_gpio-button.png?nolink&400 \|}}"|device="/dev/input/event0"|test="evtest /dev/input/event0"}} {{template>en:templates:howto:can|dipdescription="DIP switches SW2 and SW3 are used to configure the CAN interfaces CAN0 and CAN1."|dip1="SWx-1"|dip2="SWx-2"|image="{{ :en:layerscape:tqmlx2160a:linux:yocto:tqmlsx210a_can_loopback.png?nolink&400 \|}}"}} {{template>en:templates:howto:ethernet|description="The STKLX2160A Starterkit provides six Gigabit, two 10 Gigabit and one 100 Gigabit Ethernet interfaces."|ubootdescription="In U-Boot eth0 is configured as default interface. The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="The ethernet has to be activated, for that you can use the command ''ls-addni dpmac.''. The right MAC-Number depends on your SERDES-Configuration. The configuration file for the eth0 interface is located in /lib/systemd/network/ these configuration file can be altered to customize the default interface configuration."|table="\| eth0 \| 10-eth0.network \|"}} {{template>en:templates:howto:i2c|module="tqmlx2160a"|mod_arch="layerscape"|ubooti2c="[0,4,8,9,10]"|linuxi2c="[0,1,5,9,10]"}} {{template>en:templates:howto:rtc|}} {{template>en:templates:howto:temperature|description="There is one temperature sensor located on the STKLX2160A, you can read them with the following command:"|sensors="cat /sys/devices/platform/soc/2000000.i2c/i2c-0/0-001f/hwmon/hwmon0/temp1_input"}} {{template>en:templates:howto:usb|}} {{template>en:templates:howto:userled|description="The MBLX2160A has two user controllable LEDs, the behavior of these LEDs can be selected by several triggers."|image="{{ :en:layerscape:tqmlx2160a:linux:yocto:mblx2160a_user_led.png?nolink&400 \|}}"|location="/sys/devices/platform/leds/leds/"|example="/sys/class/leds/led\:user1/trigger"}}