====== Cooling kit for TQM1042/STK1042 ======

===== Parts =====

{{:intern:power:tqmt104x:stkt1042:img_2552.jpg?direct&100|(279049.0100) 1 x Heat spreader}}
{{:intern:power:tqmt104x:stkt1042:img_2549.jpg?direct&100|(164107.0100) 1 x Gap filler/pad}}
{{:intern:power:tqmt104x:stkt1042:img_2550.jpg?direct&100|(279413.0100) 1 x Heat sink}}
{{:intern:power:tqmt104x:stkt1042:img_2554.jpg?direct&100|(264233.0100) 4 x Screw M3x14 Torx T10}}
{{:intern:power:tqmt104x:stkt1042:img_2556.jpg?direct&100|(279324.0100) 4 x Screw M3x16 Hex Key 2 mm}}
{{:intern:power:tqmt104x:stkt1042:img_2555.jpg?direct&100|(279327.0100) 4 x Spring}}
\\
+ Thermal paste (no pic yet)

==== Optional ====
{{:intern:power:tqmt104x:stkt1042:img_2547.jpg?direct&100|(186322.0100) 1 x Fan}}
{{:intern:power:tqmt104x:stkt1042:img_2548.jpg?direct&100|(231584.0100) 1 x Connector}}
{{:intern:power:tqmt104x:stkt1042:img_2553.jpg?direct&100|(263912.0100) 4 x Screw M3x40 Torx T10}}

==== Unused ====
{{:intern:power:tqmt104x:stkt1042:img_2551.jpg?direct&100|Bracket}}

===== Assembly =====
  - Remove both protective films and place soft-silicone film on heat spreader\\  {{:intern:power:tqmt104x:stkt1042:img_2557.jpg?direct&300|}}
  - Screw heat sink onto heat spreader\\  {{:intern:power:tqmt104x:stkt1042:img_2558.jpg?direct&300|}}
  - Optional: Mount fan
    - Attach connector to fan \\  {{:intern:power:tqmt104x:stkt1042:img_2559.jpg?direct&300|}}
    - Mount fan on heatsink\\  {{:intern:power:tqmt104x:stkt1042:img_2560.jpg?direct&300|}}
  - Apply thermal paste on CPU die
  - Place cooling kit on top of CPU module
  - Put springs into heatsink\\  {{:intern:power:tqmt104x:stkt1042:img_2561.jpg?direct&300|}}
  - Screw cooling kit to carrier board\\  {{:intern:power:tqmt104x:stkt1042:img_2562.jpg?direct&300|}}
    - Evenly tighten all four screws carefully
    - Loosen each screw by approx. ¼ to ½ turn