====== S2 - Boot Device Selection ======
| |:::  |  **SD card**  ||||:::  |  **NOR Flash**  ||||
^ |:::  ^  S2  ||||:::  ^  S2  ||||
^ |:::  ^{{ :en:dip_4_0100_2.png?nolink&60 |}}||||:::  ^{{ :en:dip_4_0000_2.png?nolink&60 |}}||||
^  DIP  |::: ^  1  ^  2  ^  3  ^  4  |::: ^  1  ^  2  ^  3  ^  4  |
^  ON   |:::^ |  •  ^ ^ |:::^ | ^ ^ |
^  OFF  |:::^ | ^ ^ |:::^ |  •  ^ ^ |
\\

====== S3 - SerDes Configuration ======
| |:::  |  **SERDES86**  ||||:::  |  **SERDES88**  ||||
^ |:::  ^  S3  ||||:::  ^  S3  ||||
^ |:::  ^{{ :en:dip_4_1001_2.png?nolink&60 |}}||||:::  ^{{ :en:dip_4_0000_2.png?nolink&60 |}}||||
^  DIP  |::: ^  1  ^  2  ^  3  ^  4  |::: ^  1  ^  2  ^  3  ^  4  |
^  ON   |:::|  •  | | |  •  |:::| | | | |
^  OFF  |:::| |  •  |  •  | |:::| |  •  | | |
\\



==== Dip Switches S1 - S4 ====
<WRAP centeralign>
^   S1   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  GPIO DIP 0 low  |  GPIO DIP 0 high  | 
^ 2 |  GPIO DIP 1 low  |  GPIO DIP 1 high  |
^ 3 |  GPIO DIP 2 low  |  GPIO DIP 2 high  |
^ 4 |  XFI_ENSMB# low  |  XFI_ENSMB# high  |
\\  
^   S2   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  TDM Interface  |  DIU – Display Interface    | 
^ 2 |  SD Card / eMMC Boot  |  NOR Flash Boot  |
^ 3 |  T1024 USB-Clock (CPU Ball D3)  |  T1042 USB-Clock (CPU Ball F8)  |
^ 4 |  Serdes PLL1 clock = 156.25 MHz  |  Serdes PLL1 clock = 100 MHz  |
\\  
^   S3   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  Lane C: SGMII  |  Lane C: QSGMII  | 
^ 2 |  Lane E: miniPCIe  |  Lane E: Aurora   |
^ 3 |  Lane G: miniPCIe  |  Lane G: SGMII or SATA  |
^ 4 |  Lane G: SGMII  |  Lane G: SATA  |
\\  
^   S4   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  DVDD=3.3 V  |  DVDD=1.8 V  | 
^ 2 |  EVDD=3.3 V  |  EVDD=1.8 V  |
^ 3 |  CVDD=3.3 V  |  CVDD=1.8 V  |
^ 4 |  SDHC Boot  |  Other Boot source  |
\\
^   S9   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  D21 REFCLK 156.25 MHz  |  D21 REFCLK 125 MHz  | 
^ 2 |  D21 Config QSGMII to Copper  |  D21 Config SGMII to Copper  |

</WRAP>



<WRAP round important>WORK IN PROGRESS</WRAP>
~~NOTOC~~
====== STKT104x DIP switch settings ======
===== Boot Configuration ===== 
{{:en:power:tqmt104x:stkt104x:stkt104x_s1-s4_s9.png?nolink&400|}}\\
Use DIP switches S1, S2, S3 and S4 on the STKT104x to configure one of the following boot devices.
<WRAP centeralign>
==== SD card ====
^ |:::  ^  S1  ||||::: ^  S2  ||||::: ^  S3  ||||::: ^  S4  ||||
^ |:::  ^  {{:en:dipb_4_0000_UD.png?nolink&100|}}  ||||:::  ^  {{:en:dipb_4_0100_UD.png?nolink&100|}}  ||||::: ^  {{:en:dipb_4_0000_UD.png?nolink&100|}}  ||||::: ^  {{:en:dipb_4_1111_UD.png?100|}}  |||| 
^  DIP  |::: ^  4  ^  3  ^  2  ^  1  | ::: ^  4  ^  3  ^  2  ^  1  | ::: ^  4  ^  3  ^  2  ^  1  | ::: ^  4  ^  3  ^  2  ^  1  | :::
^  OFF  |:::|•|•|•|•|:::|•|•| |•|:::|•|•|•|•|:::| | | | |
^  ON   |:::| | | | |:::| | |•| |:::| | | | |:::|•|•|•|•|
</WRAP>
\\

<WRAP centeralign>
==== NOR Flash ====
^ |:::  ^  S1  ||||::: ^  S2  ||||::: ^  S3  ||||::: ^  S4  ||||
^ |:::  ^  {{:en:dipb_4_0000_UD.png?nolink&100|}}  ||||:::  ^  {{:en:dipb_4_0000_UD.png?nolink&100|}}  ||||::: ^  {{:en:dipb_4_0000_UD.png?nolink&100|}}  ||||::: ^  {{:en:dipb_4_1110_UD.png?100|}}  |||| 
^  DIP  |::: ^  4  ^  3  ^  2  ^  1  | ::: ^  4  ^  3  ^  2  ^  1  | ::: ^  4  ^  3  ^  2  ^  1  | ::: ^  4  ^  3  ^  2  ^  1  | :::
^  OFF  |:::|•|•|•|•|:::|•|•|•|•|:::|•|•|•|•|:::|•| | | |
^  ON   |:::| | | | |:::| | | | |:::| | | | |:::| |•|•|•|
</WRAP>
\\  
\\  
\\  


===== TQMT1040 SerDes Configuration (0x66) =====
\\

| |:::  |  **S3**  ||||:::  |  **S9**  ||
^ |:::  ^{{ :en:dip_4_0000_2.png?nolink&60 |}}||||:::  ^{{ :en:dip_2_01.png?nolink&40 |}}||
^  DIP  |::: ^  1  ^  2  ^  3  ^  4  |::: ^  1  ^  2   |
^  ON   |:::| | | | |:::| |  •  |
^  OFF  |:::|  •  |  •  |  •  |  •  |:::|  •  | |
\\


==== TQMT1040  ====

^                      **Ethernet interface assigment**                          ^^^^
^   X30   ^^   X37   ^^              
|  <sup>*</sup>   |  <sup>*</sup>  | fm1-mac3 |  not used  |
|  <sup>*</sup>   |  <sup>*</sup>  | fm1-mac4 |  not used  |
<sup>*</sup> Connected to Ethernet switch on STKT104x (with RCW TQMT1040_SERDES66 and DIP switch configuration for SERDES66)



----


===== Dip Switches S1 - S4 =====
<WRAP centeralign>
^   S1   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  GPIO DIP 0 low  |  GPIO DIP 0 high  | 
^ 2 |  GPIO DIP 1 low  |  GPIO DIP 1 high  |
^ 3 |  GPIO DIP 2 low  |  GPIO DIP 2 high  |
^ 4 |  XFI_ENSMB# low  |  XFI_ENSMB# high  |
\\  
^   S2   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  TDM Interface  |  DIU – Display Interface    | 
^ 2 |  SD Card / eMMC Boot  |  NOR Flash Boot  |
^ 3 |  T1024 USB-Clock (CPU Ball D3)  |  T1042 USB-Clock (CPU Ball F8)  |
^ 4 |  Serdes PLL1 clock = 156.25 MHz  |  Serdes PLL1 clock = 100 MHz  |
\\  
^   S3   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  Lane C: SGMII  |  Lane C: QSGMII  | 
^ 2 |  Lane E: miniPCIe  |  Lane E: Aurora   |
^ 3 |  Lane G: miniPCIe  |  Lane G: SGMII or SATA  |
^ 4 |  Lane G: SGMII  |  Lane G: SATA  |
\\  
^   S4   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  DVDD=3.3 V  |  DVDD=1.8 V  | 
^ 2 |  EVDD=3.3 V  |  EVDD=1.8 V  |
^ 3 |  CVDD=3.3 V  |  CVDD=1.8 V  |
^ 4 |  SDHC Boot  |  eMMC  |
\\
^   S9   ^^^
^ DIP ^  ON  ^  OFF  ^
^ 1 |  D21 REFCLK 156.25 MHz  |  D21 REFCLK 125 MHz  | 
^ 2 |  D21 Config QSGMII to Copper  |  D21 Config SGMII to Copper  |

</WRAP>