WORK IN PROGRESS ~~NOTOC~~ ====== STKT104x DIP switch settings ====== ===== Boot Configuration ===== {{:en:power:tqmt104x:stkt104x:stkt104x_s1-s4_s9.png?nolink&400|}}\\ Use DIP switches S1, S2, S3 and S4 on the STKT104x to configure one of the following boot devices. ==== SD card ==== ^ |::: ^ S1 ||||::: ^ S2 ||||::: ^ S3 ||||::: ^ S4 |||| ^ |::: ^ ||||::: ^ {{:en:dipb_4_0100_UD.png?nolink&100|}} ||||::: ^ ||||::: ^ {{:en:dipb_4_1111_UD.png?100|}} |||| ^ DIP |::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ OFF |:::^ ^ ^ ^ ^:::|•|•| |•|:::^ ^ ^ ^ ^:::| | | | | ^ ON |:::^ ^ ^ ^ ^:::| | |•| |:::^ ^ ^ ^ ^:::|•|•|•|•| \\ ==== NOR Flash ==== ^ |::: ^ S1 ||||::: ^ S2 ||||::: ^ S3 ||||::: ^ S4 |||| ^ |::: ^ ||||::: ^ {{:en:dipb_4_0000_UD.png?nolink&100|}} ||||::: ^ ||||::: ^ {{:en:dipb_4_1110_UD.png?100|}} |||| ^ DIP |::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ OFF |:::^ ^ ^ ^ ^:::|•|•|•|•|:::^ ^ ^ ^ ^:::|•| | | | ^ ON |:::^ ^ ^ ^ ^:::| | | | |:::^ ^ ^ ^ ^:::| |•|•|•| \\ \\ \\ ===== TQMT1042 SerDes Configuration (0x88) ===== \\ | |::: | **S3** ||||::: | **S9** || ^ |::: ^{{ :en:dip_4_1000_2.png?nolink&60 |}}||||::: ^{{ :en:dip_2_00.png?nolink&40 |}}|| ^ DIP |::: ^ 1 ^ 2 ^ 3 ^ 4 |::: ^ 1 ^ 2 | ^ ON |:::| • | | | |:::| | | ^ OFF |:::| | • | • | • |:::| • | • | \\ ^ **Ethernet interface assigment** ^^^^ ^ X30 ^^ X37 ^^ | not used | fm1-mac0 | fm1-mac3 | ^* | | fm1-mac2 | not used | fm1-mac4 | fm1-mac1 | ===== TQMT1040 SerDes Configuration (0x66) ===== \\ | |::: | **S3** ||||::: | **S9** || ^ |::: ^{{ :en:dip_4_0000_2.png?nolink&60 |}}||||::: ^{{ :en:dip_2_01.png?nolink&40 |}}|| ^ DIP |::: ^ 1 ^ 2 ^ 3 ^ 4 |::: ^ 1 ^ 2 | ^ ON |:::| | | | |:::| | • | ^ OFF |:::| • | • | • | • |:::| • | | \\ ^ **Ethernet interface assigment** ^^^^ ^ X30 ^^ X37 ^^ | ^* | ^* | fm1-mac3 | not used | | ^* | ^* | fm1-mac4 | not used | ^* Connected to Ethernet switch on STKT104x (with RCW TQMT1040_SERDES66 and DIP switch configuration for SERDES66) ==== Dip Switches S1 - S4 ==== ^ S1 ^^^ ^ DIP ^ ON ^ OFF ^ ^ 1 | GPIO DIP 0 low | GPIO DIP 0 high | ^ 2 | GPIO DIP 1 low | GPIO DIP 1 high | ^ 3 | GPIO DIP 2 low | GPIO DIP 2 high | ^ 4 | XFI_ENSMB# low | XFI_ENSMB# high | \\ ^ S2 ^^^ ^ DIP ^ ON ^ OFF ^ ^ 1 | TDM Interface | DIU – Display Interface | ^ 2 | SD Card / eMMC Boot | NOR Flash Boot | ^ 3 | T1024 USB-Clock (CPU Ball D3) | T1042 USB-Clock (CPU Ball F8) | ^ 4 | Serdes PLL1 clock = 156.25 MHz | Serdes PLL1 clock = 100 MHz | \\ ^ S3 ^^^ ^ DIP ^ ON ^ OFF ^ ^ 1 | Lane C: SGMII | Lane C: QSGMII | ^ 2 | Lane E: miniPCIe | Lane E: Aurora | ^ 3 | Lane G: miniPCIe | Lane G: SGMII or SATA | ^ 4 | Lane G: SGMII | Lane G: SATA | \\ ^ S4 ^^^ ^ DIP ^ ON ^ OFF ^ ^ 1 | DVDD=3.3 V | DVDD=1.8 V | ^ 2 | EVDD=3.3 V | EVDD=1.8 V | ^ 3 | CVDD=3.3 V | CVDD=1.8 V | ^ 4 | SDHC Boot | Other Boot source | \\ ^ S9 ^^^ ^ DIP ^ ON ^ OFF ^ ^ 1 | D21 REFCLK 156.25 MHz | D21 REFCLK 125 MHz | ^ 2 | D21 Config QSGMII to Copper | D21 Config SGMII to Copper |