{{template>en:templates:tabs_yocto_bootstrap_mc|product_type="Embedded module"|lang="en"|mod_name="tqma243xl"|mod_name_head="TQMa243xL"|mod_arch="arm"}}

===== STKa243xL Overview =====
This [[https://github.com/tq-systems/TQMaX4XxL.SW.MCU.BSP|GitHub]] repository contains further examples for the R5 core(s) present in the TQMa24XxL and TQMa64XxL modules.
\\
Please see the [[https://github.com/tq-systems/TQMaX4XxL.SW.MCU.BSP|GitHub]] repository for further instructions.\\
==== Serial Port Configuration ====
<panel type="primary" title="Setup Serial Port">
<grid>
<col sm="6">
^ **Settings** ^ **Value** ^
^ **Speed** | 115200 |
^ **Data** | 8 bit |
^ **Parity** | none |
^ **Stop bits** | 1 bit |
^ **Flow control** | none |
^ **New Line Char** | CR+LF |
^ **Local Echo** | Enabled (Recommended)|
</col>
<col sm="6">
\\
To communicate with the board, connect it to your computer using a USB cable (micro-USB to USB 2.0). \\ 
Open a terminal application (e.g., "Tera Term") and use the following settings:
\\
For **TeraTerm**, click **Setup -> Serial Port** \\
\\ 
When connecting the **STKa243xL** to the host PC, **two** COM interfaces will show up.
</col>
</grid>
</panel>

==== Supported Applications ====
<panel type="primary" title="Application Overview">
The TQMa243xL supports the following applications:

^ Application ^ Purpose ^
^ LED Control| Blinks an LED a specified number of times |
^ I2C Commands| Measures temperature using the I2C temperature sensor \\ Scans the I2C bus for devices \\ Accesses the Real-Time Clock over I2C |
^ Storage Commands| Executes an eMMC raw I/O test \\ Conducts a NOR flash test involving data writing and reading \\ Enables reading from or writing to the EEPROM \\ Manages factory data in EEPROM |
^ Communication Commands| Sends or receives CAN messages \\ Manages data transmission via RS485 |
^ Memory Access| Accesses the LPDDR4 for read or write operations |
^ GPIO Commands| Manages GPIO for reading inputs or setting outputs |
^ Sensor and ADC Commands| Conducts ADC tests to read voltage levels \\ Accesses the Analog Front End (AFE) for various functions |
^ Networking Commands| Manages Ethernet settings and operations |

Each demo includes a README with more detailed information, including its purpose, preparation steps, and expectations when running the demo.
</panel>

==== Build System ====
<panel type="primary" title="Structure of Repository">
^ Folder ^ Description ^
^ application| All files relevant for the BSP application |
^ demo_projects| Adapted examples from TI |
^ sbl| Adapted secondary boot loader (SBL) |
^ scripts| Scripts for automated build tests |
^ templates| Patches and configuration templates |
^ uniflash| The Uniflash tool containing example configurations |
</panel>

<callout type="primary" icon="true">
The information provided on this wiki page is subject to change due to circumstances beyond our control. While we strive to keep all details as accurate and up-to-date as possible, it is possible that certain updates or changes may go unnoticed for some time. As a result, some sections of this page may contain outdated information. If you notice any mistakes in the documentation, we kindly ask you to inform the TQ Support through our ticket system.
</callout>