~~NOCACHE~~
<embed en:templates:tabs_winec>
  <label lang>en</label>
  <label mod_name>tqma335x</label>
  <label mod_name_head>TQMa335x</label>
  <label mod_arch>arm</label>
  <label bsp_name>ec2013</label>
  <label bsp_name_head>Windows EC 2013</label>
</embed>
\\  
\\
===== BSP Installation =====
\\
In order to install the BSP, copy the entire “WINCE800” folder (contained in the “BSP” folder) of the Package over the existing WINCE800 folder in your WEC 2013 installation location.
This adds the BSP under **WINCE800\platform\AM335x_TQS**, as well as an example OSDesign under \\
**WINCE800\OSDesigns\TQMA335X**.

It is recommended to use the supplied example OSDesign as a starting point. Please follow these steps:

  * Open Visual Studio and select **FILE -> Open -> Project/Solution**. Select the file **WINCE800\OSDesigns\TQMA335X\TQMA335X\TQMA335X.pbxml**.
  * The Example OSDesign should be opened and Visual Studio should switch to the PlatformBuilder Configuration.
  * Select **BUILD -> Configuration Manager…** and make sure **“AM335x_TQS ARMV7 Release”** is selected as Active solution configuration.
  * After some time (depending on your system), the build process should finish. You can now proceed to booting the device


===== Adapt BSP =====
\\
Alternatively, you can create your own custom solution instead of using the provided example OSDesign:
  * Open Visual Studio and select **FILE -> New -> Project**.
  * Select **Other Project Types -> Platform Builder** and give it a name.
  * In the OSDesign Wizard, select **AM335x_TQS: ARMV7**