{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqma335x"|mod_name_head="TQMa335x"|mod_arch="arm"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}}
\\


===== Starterkit Interfaces and Functions =====

{{template>en:templates:howto:audio|microphone="X19"|linein="X20"|lineout="X21"|mb_name="MBa335x"|audio_image="{{ :en:arm:tqma335x:linux:yocto:how_to:mba335x_audio.png?nolink&400\| }}"}}

{{template>en:templates:howto:buttons|button_description="There are three GPIO buttons on the MBa335x."|button_image="{{ :en:arm:tqma335x:linux:yocto:tqma335x_gpio-button.png?nolink&400 \|}}"|button_device="/sys/class/gpio/"}}

{{template>en:templates:howto:can|dipdescription="DIP switch S3 is used to configure the CAN interfaces CAN0 and CAN1."|dip1="S3-1"|dip2="S3-2"|can_image="{{ :en:arm:tqma335x:linux:yocto:tqma335x_can_loopback.png?nolink&400 \|}}"}}

{{template>en:templates:howto:ethernet|ethernet_description="The STKa335x Starterkit provides two Gigabit Ethernet interfaces."|ubootdescription="In U-Boot eth0 is configured as default interface. The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="Both Ethernet interfaces are activated and configured by systemd-network. The configuration file for the eth0 interface is located in /lib/systemd/network/ these configuration file can be altered to customize the default interface configuration."|ethernet_table="\| eth0  \| 10-eth0.network  \|"}}


{{template>en:templates:howto:i2c|mod_name="tqma335x"|mod_arch="arm"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:temperature|}}

{{template>en:templates:howto:usb|}}