~~NOCACHE~~
===== Linux =====
==== Version ====
**Linux 3.9 (BSP 0105)**
**Linux 3.5 (up to BSP 0104)**
==== Features ====
^ Device ^ Component ^ Status ^ Version ^ BSP rev. ^ Remarks ^
| i.MX53 | CPU | + | 3.5 / 3.9 | 0100 | i.MX53 rev 2.1 (Cortex(r)-A8) |
| ::: | Ethernet (FEC) | + | 3.5 / 3.9 | 0100 | |
| ::: | DVI Display | + | 3.5 / 3.9 * | 0101 |for Rev 0102 see [[en:arm:tqma53:linux:ptxdist:known_issues#dvi_support| here]] for a fix |
| ::: | LVDS Display | + | 3.5 / 3.9 * | 0101 | see [[.:how_to#change_from_dvi_to_lvds_output | Change from DVI to LVDS output]] \\ Output clone only |
| ::: | parallel Display | + | 3.5 / 3.9 * | 0101 | see [[.:how_to#configure_dvi_parallel_display | Change from DVI to parallel LCD]] |
| ::: | VGA | + | 3.9 * | 0105 | see [[.:how_to#change_from_dvi_to_vga_output | Change from DVI to VGA]] |
| ::: | USB 2.0 | + | 3.5 / 3.9 * | 0102 |OTG Host, see [[.:how_to#configure_usb_otg_support | howto configure OTG port]] |
| ::: | eSDHC | + | 3.5 / 3.9 | 0101 | SD-CARD / eMMC |
| ::: | SATA | + | 3.9 | 0105 | only with u-boot |
| ::: | GPIO | + | 3.5 / 3.9 | 0100 | |
| ::: | SPI | + | 3.5 / 3.9 | 0102 | known to be work on customized base boards |
| ::: | UART | + | 3.5 / 3.9 | 0100 | |
| ::: | I²C | + | 3.5 / 3.9 | 0100 | EEPROM, Temprature sensor, GPIO expander |
| ::: | CAN | + | 3.5 / 3.9 | 0101 | |
| ::: | Audio | + | 3.5 / 3.9 | 0103 | SDMA firmware needed, see [[.:how_to#use_audio_port | here]]|
| ::: | RTC (PMIC) | + | 3.9 * | 0105 | |
| ::: | Touch (PMIC) | + | 3.9 * | 0105 | |
| ::: | Touch (RS232 / USB)| + | 3.5 / 3.9 | 0102 | |
| ::: | GPU | + | 3.5 / 3.9 * | 0104 | tested with Freescale binaries, see [[.:how_to#use_the_gpu_of_imx53 | here]] |
| ::: | VPU | + | 3.9 * | 0105 | CODA firmware needed, see [[.:how_to#use_the_vpu_of_imx53 | here]] |
| ::: | CSI | $ | | | [[support@tqs.de?subject=[Feature Request] TQMa53, Linux, CSI|on request]] |
| ::: | EIM | $ | | | [[support@tqs.de?subject=[Feature Request] TQMa53, Linux, EIM|on request]] \\ tested on custom mainboard with 16 bit SRAM |
| MBa53(LAN9514) | Ethernet | + | 3.9 | 0105 | automatic MAC configuration not implemented |
| ::: | USB 2.0 | + | 3.5 / 3.9 * | 0102 | 2 x Host|
| Key: + tested %%|%% - untested %%|%% ? open %%|%% * patches in BSP %%|%% $ on request ||||||
==== Changelog ====
=== Rev 0105 ===
* Feature: linux 3.9
* Feature: Touch / RTC (PMIC MC13708)
* Feature: VPU
* Feature: VGA
* Feature: Dual LVDS (only display cloning)
* Feature: SATA
=== Rev 0104 ===
* Feature: GPU support
* Reenable dvi as default setting
=== Rev 0103 ===
* Feature: Audio support
=== Rev 0102 ===
* Feature: USB support
* Feature: fix SD-card enumeration order based on controller ID
* Feature: disable framebuffer console to prevent display deactivation
=== Rev 0101 ===
* Update to linux 3.5
* Feature: device tree support