{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqma8mx"|mod_name_head="TQMa8Mx"|mod_arch="arm"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}}

===== Starterkit Interfaces and Functions =====

{{template>en:templates:howto:audio|audio_description="The microphone input is not supported in the current BSP version."|microphone="X12"|linein="X13"|lineout="X14"|mb_name="MBa8Mx"|audio_image=":en:arm:tqma8mx:linux:yocto:how_to:mba8mx_audio.png"}}

{{template>en:templates:howto:buttons|button_description="There are three GPIO buttons on the MBa8Mx. They are bound to the gpio-keys driver, and can be tested with the evtest tool."|button_table="\| S1 \| Button 0 \|
\| S2 \| Button 1 \|
\| S3 \| Button 2 \|"|button_image="{{ :en:arm:tqma8mxnl:linux:yocto:tqma8mxnl_gpio-button.png?nolink"|button_device="/dev/input/event0"|button_test="evtest /dev/input/event0"}}

{{template>en:templates:howto:cpu|stk_name="STKa8Mx"}}

{{template>en:templates:howto:ethernet|ethernet_description="The STKa8Mx Starterkit provides one Gigabit Ethernet interfaces."|ubootdescription="The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="The Ethernet interface is activated and configured by systemd-network. The configuration file for the interface is located in /lib/systemd/network/ these configuration file can be altered to customize the default interface configuration."|ethernet_table="\| eth0  \| 10-eth0.network  \|"}}

{{template>en:templates:howto:gpu|}}

{{template>en:templates:howto:hdmi|stk_name="STKa8Mx"|hdmi_description="The DIP Switch S9-4 must be ON."|hdmi_example="imx8mq-tqma8mq-mba8mx-dcss-hdmi.dtb''"|mod_name="tqma8mx"|mod_arch="arm"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:lvds|stk_name="STKa8Mx"|lvds_description="The DIP Switch S9-4 must be OFF."|lvds_example="imx8mq-mba8mx-lcdif-lvds-tm070jvhg33.dtb''"}}

{{template>en:templates:howto:mipi_csi|mod_arch="arm"|qsg_name="EMB_QSG_CAM_KIT_STKa8Mx_Rev"|cam_qsg_revision="001"|imx327_dtb="imx8mq-mba8mx-hdmi-imx327.dtb"|ov9281_dtb="imx8mq-mba8mx-hdmi-ov9281.dtb"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:spi|mb_name="MBa8Mx"|amountspi="two"}}

{{template>en:templates:howto:ssh|stk_name="STKa8Mx"}}

{{template>en:templates:howto:temperature|}}

{{template>en:templates:howto:usb|}}
<hidden>
{{template>en:templates:howto:userled|userled_description="The MBa8Mx has two user controllable LEDs, the behavior of these LEDs can be selected by several triggers."|userled_image="{{ :intern:arm:tqma8mx:linux:yocto:mba8mx_user_led.png?nolink&400 \|}}"|userled_location="/sys/devices/platform/gpio-leds/leds/"|led_example="led1"|userled_example="/sys/class/leds/led1/trigger"}}
</hidden>