~~NOCACHE~~
====== Entry Page ======
===== Product URL list =====

[[https://www.tq-group.com/en/products/tq-embedded/arm-architecture/tqma8mxnl/|TQ product page TQMa8MxNL]]\\  

===== Board Support Packages =====
  * [[en:arm:tqma8mxnl:linux:yocto:overview| YOCTO Linux BSP Documentation]] 

===== Third-Party Add-Ons =====
   * [[:en:third-party:ittia:db-sql|ITTIA DB SQL]]
<WRAP hide>
   * [[:en:third-party:systemcorp:iec61850|SystemCORP IEC 61850]]
   * [[:en:third-party:netmodule:iec62439|NetModule IEC 62439]]
</WRAP>


===== Starterkit =====

  * [[en:arm:tqma8mxnl:mba8mx:dip_switches|  MBa8Mx DIP switch settings]]

====== Hardware ======

===== Debug Connection =====

The TQMa8MxNL debug UART is connected via a Silicon Labs USB-to-Serial converter to X16 (micro-USB) on the MBa8Mx. A micro-USB/USB-A cable is part of the STKa8MxNL accessory set. Depending on the host operating system,  driver may need to be installed.

===== Onboard I2C devices =====

<panel type="primary" title="TQMa8MxNL Rev.01xx / MBa8Mx Rev.03xx" no-body="true">
^  I2C bus  ^  TQMa8MxNL  ^^^^^^^^^^  
^  I2C1  |  0x1B\\  Temp Sensor  |  0x25\\  PMIC  |  0x33\\  Temp Sensor\\  EEPROM\\  Protection Command  |  0x48  \\  Plug & Trust Secure element\\  (optional)  |  0x51\\ RTC\\  (optional)  |  0x53\\  Temp Sensor EEPROM  |  0x57\\  EEPROM  |  |||     
  


^  I2C bus  ^  MBa8Mx  ^^^^^
^  I2C1  |  0x11\\  System Controller  |  0x24\\  Port Expander  |  0x27\\  Port Expander  | ||| 
^  I2C2  |  0x18\\ Audio Codec  |  0x37\\  Temp Sensor\\  EEPROM\\  Protection Command  |  0x44\\  USB Hub  |  0x57\\ Temp Sensor\\  EEPROM  |  0x68\\ PCIe Clock Generator  |  0x1F\\  Temp Sensor  |  
^  I2C3  |  0x5A\\ MIPI-DSI / LVDS Bridge  |  also available at\\ Mini PCIe (X28), Mikro Bus (X20 / X21), PCIe (X36), MIPI-CSI (31)  |||||

</panel>
====== Hardware Issues ======




====== Linux BSP ======
===== U-Boot =====
<panel type="primary" title="U-Boot">

^ Feature  ^^^^  TQMa8.BSP Revision  ^  Remarks  ^
^ TQ Product  ^ Chip   ^ Interface  ^ Function  ^  0081 - 0091  ^
| TQMa8MxNL  | i.MX8M Nano  | ENET0  | GbE  |  ✔  |
| :::  | i.MX8M Nano  | FlexSPI  | QSPI NOR  |  ✔  |
| :::  | i.MX8M Nano  | Fuse  | OTP  |  ✔  | 
| :::  | i.MX8M Nano  | GPIO  |      |  ✔  | 
| :::  | i.MX8M Nano  | I²C1  | Bus Access  |  ✔  |    |
| :::  | i.MX8M Nano  | I²C2  | Bus Access  |  ✔  |   |
| :::  | i.MX8M Nano  | I²C3  | Bus Access  |  ✔  |   |  
| :::  | i.MX8M Nano  | UART3  | Debug console  |  ✔  |  Default console  |
| :::  | i.MX8M Nano  | USB   | Host  |  ✔  | 
| :::  | i.MX8M Nano  | uSDHC  | eMMC / SD-Card  |  ✔  |  SD card / eMMC  |

</panel>

<accordion collapsed="true">
<panel type="primary" title="U-Boot - Old Revisions" >

^ Feature  ^^^^ BSP Revision  ^^^^^^^^ Remarks  ^
^ TQ Product  ^ Chip   ^ Interface  ^ Function  ^  0026  ^  0027  ^  0030  ^  0034  ^  0035  ^  0052  ^  0054  ^  0056  ^
| TQMa8MxNL  | i.MX8M Nano  | ENET0  | GbE  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |
| :::  | i.MX8M Nano  | FlexSPI  | QSPI NOR  |    |    |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |
| :::  | i.MX8M Nano  | Fuse  | OTP  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  | 
| :::  | i.MX8M Nano  | GPIO  |      |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  | 
| :::  | i.MX8M Nano  | I²C1  | Bus Access  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |    |
| :::  | i.MX8M Nano  | I²C2  | Bus Access  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |   |
| :::  | i.MX8M Nano  | I²C3  | Bus Access  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |   |  
| :::  | i.MX8M Nano  | UART3  | Debug console  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  | Default console  |
| :::  | i.MX8M Nano  | USB   | Host  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  | 
| :::  | i.MX8M Nano  | uSDHC  | eMMC / SD-Card  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  | SD card / eMMC  |

</panel>
</accordion>
<panel type="info" title="Supported boot devices" no-body="true">
^  Boot device  ^  supported  ^
|  eMMC  |  ✔  |
|  SD Card  |  ✔  |
|  QSPI NOR  |  ✔  | 
</panel>

===== Kernel =====
===== Operating System =====
<panel type="primary" title="Linux">
^ Feature  ^^^^  TQMa8.BSP Revision  ^  Remarks  ^
^ TQ Product  ^ Chip  ^ Interface  ^ Function  ^  0081 - 0091  ^:::^ 
| TQMa8MxNL  | i.MX8M Nano  | ENET0 | GbE  |  ✔  |  |
| :::  | i.MX8M Nano  | FlexSPI  | QSPI  |  ✔  |  |
| :::  | i.MX8M Nano  | GPIO  |  |  ✔  |  |
| :::  | i.MX8M Nano  | GPU   | Hardware Accelaration  |  ✔  |  |
| :::  | i.MX8M Nano  | I²C1  | Bus Access  |  ✔  |  [[./linux/yocto/overview#onboard_i2c_devices|See onboard I2C devices]]  |
| :::  | i.MX8M Nano  | I²C2  | Bus Access  |  ✔  |  [[./linux/yocto/overview#onboard_i2c_devices|See onboard I2C devices]]  |
| :::  | i.MX8M Nano  | I²C3  | Bus Access  |  ✔  |  [[./linux/yocto/overview#onboard_i2c_devices|See onboard I2C devices]]  |
| :::  | i.MX8M Nano  | LPUART1  | Debug Console  |  ✔  |  |
| :::  | i.MX8M Nano  | MIPI CSI  | Camera Interface  |  ✔  |  |
| :::  | i.MX8M Nano  | MIPI DSI  | SN65DSI84  |  ✔  |  DSI-to-LVDS Bridge  |
| :::  | i.MX8M Nano  | PCIe   | PCIe Gen2 |  ✔  |  | 
| :::  | i.MX8M Nano  | PWM   |  |  ✔  |  |
| :::  | i.MX8M Nano  | SAI3  | TLV320AIC3204\\ (Audio Codec)  |  ✔  |  |  
| :::  | i.MX8M Nano  | USB1  | TUSB8041I\\  (USB Hub) |  ✔  |  |
| :::  | i.MX8M Nano  | USB2  | Host |  ✔  |  |
| :::  | i.MX8M Nano  | :::  | OTG |  ✔  |  |
| MBa8Mx  | TLV320AIC3204  | Audio Codec  | Headphone Out / Line Out  |  ✔  |  |
| ::: | ::: | ::: | Line In  |  ✔  |  |
| ::: | ::: | ::: | Microphone In  |  ✘  |  |
| :::  | TUSB8041I | USB1  | Host 1  |  ✔  |  |
| :::  | TUSB8041I | USB2  | Host 2  |  ✔  |  |
| :::  | TUSB8041I | USB3  | Host 3  |  ✔  |  |
| :::  | TUSB8041I | USB4  | Host 4  |  ✔  |  | 
| :::  | SN65DSI84  | DSI-to_LVDS Bridge  | LVDS  |  ✔  |  |

</panel>

<accordion collapsed="true">
<panel type="primary" title="Linux - Old Revisions">
^ Feature  ^^^^ BSP Revision  ^^^^^^^^ Remarks  ^
^ TQ Product  ^ Chip  ^ Interface  ^ Function  ^  0026  ^  0027  ^  0030  ^  0034  ^  0035  ^  0052  ^  0054  ^  0056  ^:::^ 
| TQMa8MxNL  | i.MX8M Nano  | ENET0 | GbE  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | i.MX8M Nano  | FlexSPI  | QSPI  |  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | i.MX8M Nano  | GPIO  | |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | i.MX8M Nano  | GPU   | Hardware Accelaration  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | i.MX8M Nano  | I²C1  | Bus Access  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  | [[./linux/yocto/overview#onboard_i2c_devices|See onboard I2C devices]]  |
| :::  | i.MX8M Nano  | I²C2  | Bus Access  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  | [[./linux/yocto/overview#onboard_i2c_devices|See onboard I2C devices]]  |
| :::  | i.MX8M Nano  | I²C3  | Bus Access  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  | [[./linux/yocto/overview#onboard_i2c_devices|See onboard I2C devices]]  |
| :::  | i.MX8M Nano  | LPUART1  | Debug Console  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | i.MX8M Nano  | MIPI CSI  | Camera Interface  |    |    |    |    |    |    |  ✔  |  ✔  |  |
| :::  | i.MX8M Nano  | MIPI DSI  | SN65DSI84  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  | DSI-to-LVDS Bridge  |
| :::  | i.MX8M Nano  | PCIe   | PCIe Gen2 |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  | 
| :::  | i.MX8M Nano  | PWM   | |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | i.MX8M Nano  | SAI3  | TLV320AIC3204\\ (Audio Codec)  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |  
| :::  | i.MX8M Nano  | USB1  | TUSB8041I\\  (USB Hub) |    |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | i.MX8M Nano  | USB2  | Host |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | i.MX8M Nano  | :::  | OTG |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| MBa8Mx  | TLV320AIC3204  | Audio Codec  | Headphone Out / Line Out  |   |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| ::: | ::: | ::: | Line In  |   |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| ::: | ::: | ::: | Microphone In  |   |   |   |  |  |  |  |  |
| :::  | TUSB8041I | USB1  | Host 1  |    |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | TUSB8041I | USB2  | Host 2  |    |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | TUSB8041I | USB3  | Host 3  |    |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |
| :::  | TUSB8041I | USB4  | Host 4  |    |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  | 
| :::  | SN65DSI84  | DSI-to_LVDS Bridge  | LVDS  |    |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  ✔  |  |

</panel>
</accordion>
===== FAQ =====
===== Yocto =====
===== Yocto BSP Version Matrix - Old Revisions =====
<accordion collapsed="true">
<panel type="primary" title="BSP Version Matrix - Old Revisions">
^  BSP Revision  ^  ++meta-tq release|\\ [[https://github.com/tq-systems/meta-tq]]++  ^  Yocto Project / Poky Release  ^  Target machine((i.e. value for [[https://www.yoctoproject.org/docs/3.0.3/ref-manual/ref-manual.html#var-MACHINE|MACHINE]] variable))  ^  U-Boot  ^  Linux Kernel  ^
|  [[https://github.com/tq-systems/meta-tq/releases/tag/hardknott.TQMa8MxNL.BSP.SW.0080|0080]]  |  [[https://github.com/tq-systems/ci-meta-tq/tree/hardknott|hardknott]]  |  3.3.3 - Hardknott  |  tqma8mxnl-1gb-mba8mx  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/hardknott.TQMa8MxNL.BSP.SW.0080|v2020.04_imx_5.4.70_2.3.0]]  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/hardknott.TQMa8MxNL.BSP.SW.0080|fslc-5.10-2.1.x-imx]]  |
|  [[https://github.com/tq-systems/ci-meta-tq/releases/tag/zeus.TQMa8MxNL.BSP.SW.0056|0056]]  |  [[https://github.com/tq-systems/meta-tq/tree/zeus-tqma8|zeus-tqma8]]  |  3.0.3 Zeus  |  tqma8mxnl-1gb-mba8mx  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0056|v2020.04_imx_5.4.70_2.3.0]]  |  [[https://github.com/tq-systems/linux-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0056|rel_imx_5.4.70_2.3.0]]  |
|  [[https://github.com/tq-systems/ci-meta-tq/releases/tag/zeus.TQMa8MxNL.BSP.SW.0054|0054]]  |  [[https://github.com/tq-systems/meta-tq/tree/zeus-tqma8|zeus-tqma8]]  |  3.0.3 Zeus  |  tqma8mxnl-1gb-mba8mx  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0054|v2020.04_imx_5.4.70_2.3.0]]  |  [[https://github.com/tq-systems/linux-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0054|rel_imx_5.4.70_2.3.0]]  |
|  [[https://github.com/tq-systems/ci-meta-tq/releases/tag/zeus.TQMa8MxNL.BSP.SW.0052|0052]]  |  [[https://github.com/tq-systems/meta-tq/tree/zeus-tqma8|zeus-tqma8]]  |  3.0.3 Zeus  |  tqma8mxnl-1gb-mba8mx  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0052|v2020.04_imx_5.4.70_2.3.0]]  |  [[https://github.com/tq-systems/linux-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0052|rel_imx_5.4.70_2.3.0]]  |
|  [[https://github.com/tq-systems/ci-meta-tq/releases/tag/zeus.TQMa8MxNL.BSP.SW.0035|0035]]  |  [[https://github.com/tq-systems/meta-tq/tree/zeus-tqma8|zeus-tqma8]]  |  3.0.3 Zeus  |  tqma8mxnl-1gb-mba8mx  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0035|v2019.04-lf-5.4.y-1.0.0]]  |  [[https://github.com/tq-systems/linux-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0035|lf-5.4.y-1.0.0]]  |
|  [[https://github.com/tq-systems/ci-meta-tq/releases/tag/zeus.TQMa8MxNL.BSP.SW.0034|0034]]  |  [[https://github.com/tq-systems/meta-tq/tree/zeus-tqma8|zeus-tqma8]]  |  3.0.3 Zeus  |  tqma8mxnl-1gb-mba8mx  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0034|v2019.04-lf-5.4.y-1.0.0]]  |  [[https://github.com/tq-systems/linux-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0034|lf-5.4.y-1.0.0]]  |
|  [[https://github.com/tq-systems/ci-meta-tq/releases/tag/zeus.TQMa8MxNL.BSP.SW.0030|0030]]  |  [[https://github.com/tq-systems/meta-tq/tree/zeus-tqma8|zeus-tqma8]]  |  3.0.3 Zeus  |  tqma8mxnl-1gb-mba8mx  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0030|v2019.04-lf-5.4.y-1.0.0]]  |  [[https://github.com/tq-systems/linux-tqmaxx/releases/tag/zeus.TQMa8MxNL.BSP.SW.0030|lf-5.4.y-1.0.0]]  |
|  [[https://github.com/tq-systems/ci-meta-tq/releases/tag/zeus.TQMa8.BSP.SW.0027|0027]]  |  [[https://github.com/tq-systems/ci-meta-tq/tree/zeus-tqma8|zeus-tqma8]]  |  3.0.3 - Zeus  |  tqma8mxnl-1gb-mba8mx  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/zeus.TQMa8.BSP.SW.0027|v2019.04-lf-5.4.y-1.0.0]]  |  [[https://github.com/tq-systems/linux-tqmaxx/releases/tag/zeus.TQMa8.BSP.SW.0027|lf-5.4.y-1.0.0]]   |
|  [[https://github.com/tq-systems/ci-meta-tq/releases/tag/zeus.TQMa8.BSP.SW.0026|0026]]  |  [[https://github.com/tq-systems/ci-meta-tq/tree/zeus-tqma8|zeus-tqma8]]  |  3.0.3 - Zeus  |  tqma8mxnl-1gb-mba8mx  |  [[https://github.com/tq-systems/u-boot-tqmaxx/releases/tag/zeus.TQMa8.BSP.SW.0026|v2019.04-lf-5.4.y-1.0.0]]  |  [[https://github.com/tq-systems/linux-tqmaxx/releases/tag/zeus.TQMa8.BSP.SW.0026|lf-5.4.y-1.0.0]]   |
</panel>
</accordion>
{{section>en:general_information:yocto:tips#bsp_release_auto_notification&noheader}}

===== Yocto Target Machines =====
<panel type="primary" title="Yocto Target Machines" no-body="true">

^  TQMa8.BSP Revision  ^  Target machine  |
|  [[https://github.com/tq-systems/ci-meta-tq/releases/tag/zeus.TQMa8.BSP.SW.0026|≥0026]]   |  tqma8mxnl-1gb-mba8mx  |

\\
</panel> 

===== Yocto Changelog =====
<panel type="info" title="Changelog" no-body="true">

<accordion collapsed="true">

<panel title="Rev.0056">

**BSP**

  * Enable building multiple u-boot configs
  

**U-Boot**

  * Support multiple u-boot configs. Build all bootstream variants for all enabled u-boot configs



</panel>

<panel title="Rev.0054">

**BSP**
  * Prepare support for Vision Components GmbH MIPI CSI cameras
    * Add dvice trees
    * Add "camera" MACHINE_FEATURE
 
**Linux**
  * Add devicet rees for Vision Components GmbH MIPI CSI cameras
  * Add RAW/Bayer formats for imx8_mipi_csi2 and mx8-isi-cap
  * Build camera and support drivers into kernel instead as module
  * Port and implement fixes for imx8_mipi_csi2 and mx8-isi-cap
  
</panel>

<panel title="Rev.0052">

**BSP**
  * Sanitize variable assignments to improve reusability in config/machines:
    * Replace IMAGE_INSTALL_append with more approbiate MACHINE_EXTRA_RRECOMMENDS_append
    * Remove all dirty magic for DISTRO_FEATURES_remove
    * Replace hard assignments to IMAGE_BOOT_FILES with ?=
  * Remove remaining docs for incompatible MBa8Mx REV.020x
  * Drop support for U-Boot v2019.04, since no user left
  * Remove local recipe firmware-imx
  * Support for NXP BSP rel_imx_5.4.70_2.3.1
    * u-boot: migrate all imx8 machines with U-Boot v2020.04 support to NXP BSP version
    * linux: migrate all machines to NXP BSP version
    * imx-atf: add fork based on NXP BSP version 
    * Optimize codec preconfig in alsa-state. PCM input and LineOut amp factors were configured suboptimal.
  * Update to new CortexM demo package in machine config
  * rewrite recipe for CortexM demos:
    * Based on NXP SDK v2.9.0
    * Rename and sanitize recipe
    * Use versioned archive name
  * Disable packages only relevant for NXP STK in machine config:
    * nxp8987 WiFi
    * imx-m[4,7]-demos

  
**U-Boot**
  * Fix phy_config using devicetree
  * Forward error from phy_config
  * Prevent nasty voltage switch error warning for e-MMC
  * Use mmc rescan in env scripts to prevent errors when exchanging SD Card
  * I2C recovery gpio
  * Support SD UHS modes and optimized pad config
  * Backport lmb fixes from upstream, needed for newer DTB with lots of reserved mem regions
  * Fix flow for EVCR access
  * Optimize RAM-config
  * Use verified pad config
  * Optimize PMIC config in SPL
    * Lower voltage for LDO2 / V_SNVS_0V8 
    * Improved configs for BUCK1/3 (recommendations from hardware development guide and app note for using same board for i.MX8MN / i.MX8MM)
    * DSR support for Micron SPI NOR

**Linux**
  * Fix DT for mPCIe USB cards
  * Port fixes for Codec on STK to prevent race condition that could cause driver load failure
  * Enable wifi support in kernelconfig
  * I2C recovery gpio
  * Support SD UHS modes and optimized pad config
  * Fix SAI interface sychronous play / record
  * Use verified pad config
  * Label sys EEPROM as read only
  * Backport upstream PMIC driver for PCA9450
    * adjust device tree
    * Limit voltage rails 
  * DSR support for Micron SPI NOR

</panel>

<panel title="Rev.0035">

**U-Boot**
  * Fixes for hardware revision 0200
</panel>

<panel title="Rev.0034">

**U-Boot**
  * Updated RAM-Timing for TQMa8MxML with 2GB
  * Add support HW REV.0200
  * Removed support for HW REV.0100
  * e-MMC is now on USDHC3
  * Some GPIO signals changed
  * remove muxing and usage of USER_LED_3 signal as already done in kernel dtb

**Linux**
  * Add support HW REV.0200
  * Removed support for HW REV.0100
  * e-MMC is now on USDHC3
  * Some GPIO signals changed
  * Add recovery GPIO for I2C1

</panel>

<panel title="Rev.0030">
**BSP**
  * Integrate CortexM examples for TQMa8Mx[M,N]L
  * Include RPMSG examle device tree
  * Build FlexSPI bootstream by default


**U-Boot**
  * Add flexspi boot support
  * Add env support for bootstream update on flexspi
  * Add env support for CortexM core boot and update
  * Fix compatible and model names in devicetree
  * fix spelling errors in multiple places

**Linux**
  * Add devicetree for RPMSG support
  * Fix compatible and model names in devicetree
  * remove USER_LED_3
  * switch to gpio CS for SPI

</panel>

<panel title="Rev.0027">
**BSP**
  * machines: rename some machines to unify naming and reflect real mem size

**U-Boot**
  * Rename defconfigs to unify naming )
  * Support for RTC load capacity configuration
  * QSPI Support 
  * USB host support (Hub on MBa8Mx)
  * simplify USB OTG (use ID from USB)
  * Fix RAM Timing for 1GiB
  * Fix Kconfig for default device tree
  * Fix not working USB download in SPL
  * USB power domain handling

**Linux**
  * Simplify USB OTG (use ID from USB)
  * Added audio support
  * USB host support
  * Enable QSPI flash
  * Enable SD104 for SD-Card
  * Remove pull config from pad settings
</panel>

<panel title="Rev.0026">
  * Initial support for TQMa8MxNL
</panel>
</accordion>
</panel>

===== Yocto Images =====

<accordion collapsed="true">
<panel title="Target Machine: tqma8mxnl-1gb-mba8mx">

**System Images**
<grid>
<col sm="12">
^ Boot Device  ^ Symlink  ^ File  ^
^ SD Card/eMMC  | tq-image-weston-tqma8mxnl-1gb-mba8mx.wic  | tq-image-weston-tqma8mxnl-1gb-mba8mx-<build_timestamp>.rootfs.wic  |
</col>
</grid>

**Bootstream (Bootloader) Binaries**
<grid>
<col sm="12">

^ Boot Device ^ Symlink  ^ File  ^
^ SD/eMMC  | imx-boot | imx-boot-tqma8mxnl-1gb-mba8mx-sd.bin-flash_spl_uboot  |
</col>
</grid>

**Linux Kernel Image**
<grid>
<col sm="12">
^ Symlink  ^ File  ^
| Image  | Image--5.10-r0-tqma8mxnl-1gb-mba8mx-<build_timestamp>.bin  |
</col>
</grid>

**Devicetree Blobs**
<grid>
<col sm="12">
^ Symlink  ^ Description  ^
| imx8mn-tqma8mqnl-mba8mx.dtb | Default |
| imx8mn-tqma8mqnl-mba8mx-lcdif-lvds-tm070jvhg33.dtb | Default with LVDS interface activated |
| imx8mn-tqma8mqnl-mba8mx-lcdif-lvds-tm070jvhg33-imx327.dtb | Default with CSI color Camera and LVDS activated |
| imx8mn-tqma8mqnl-mba8mx-lcdif-lvds-tm070jvhg33-ov9281.dtb | Default with CSI monocrome Camera and LVDS activated  |
| imx8mn-tqma8mqnl-mba8mx-rpmsg.dtb | Default with RPMSG support |
</col>
</grid>

**RootFS Images**
<grid>
<col sm="12">
^ Symlink  ^ File  ^
| tq-image-weston-tqma8mxnl-1gb-mba8mx.ext4  | tq-image-weston-tqma8mxnl-1gb-mba8mx-<build_timestamp>.rootfs.ext4  |
| tq-image-weston-tqma8mxnl-1gb-mba8mx.tar.gz  | tq-image-weston-tqma8mxnl-1gb-mba8mx-<build_timestamp>.rootfs.tar.gz  |
</col>
</grid>

</panel>
</accordion>

===== Yocto Deployment  =====
==== Device assignment ====
<WRAP round info 40%>__Device assignment:__\\
//mmcdev 0// = eMMC\\
//mmcdev 1// = SD Card\\
</WRAP>

==== Yocto specific command Update eMMC ==== 
1. Run the following commands in the Uboot shell to create update script: 
<code> 
setenv root_loop 'setenv start 24000 && setenv r1 $rootblks16 && while itest $r1 -gt 0; do if itest $r1 -gt 0x100000; then setenv count 0x100000; else setenv count $r1; fi && mmc dev 1 && mmc read $loadaddr $start $count && mmc dev 0 && mmc write $loadaddr $start $count && setexpr start $start + $count && setexpr r1 $r1 - $count; done; setenv r1; setenv start; setenv count'
</code> 

<code> 
setenv  install_firmware 'echo MBR... && mmc dev 1 && mmc read $loadaddr 0 1 && mmc dev 0 && mmc write $loadaddr 0 1 && echo Bootstream... && mmc dev 1 && mmc read $loadaddr 3F 1FC0 && mmc dev 0 && mmc write $loadaddr 3F 1FC0 && echo U-Boot environment... && mmc dev 1 && mmc read $loadaddr 2000 2000 && mmc dev 0 && mmc write $loadaddr 2000 2000 && echo Firmware Partition... && mmc dev 1 && mmc read $loadaddr 4000 20000 && mmc dev 0 && mmc write $loadaddr 4000 20000  && echo Root FS... && run root_loop'
</code> 


  * Create the variable rootblks16 to hold the size of the root filesystem as a hex number representing the size as the amount of 512 byte blocks:
<code>setenv rootblks16 <number of 512 byte blocks as hex number></code>


<callout type="info" icon="true">
** Example for RootFS size of 2070MB: ** \\
2070** * **1024** * **1024 = 2170552320
\\
2170552320** / **512 = 4239360
\\ 
4239360 = 40B000<sub>HEX</sub>

</callout>
<code>
setenv rootblks16 0x40B000
</code>

==== uboot command to start netboot ====

<code>
=> run netboot
</code>