====== MBa8x DIP switch settings ======
===== Boot Device Selection (S1) =====
To select the desired boot medium set the DIP switches S1 accordingly. \\
The following boot modes of the TQMa8x can be selected by the DIP switches S1 on the MBa8x.
[size=150%]**S1**[/size]
{{ :en:dip_6_001100.png?nolink&150 |}}
[size=150%]**S1**[/size]
{{ :en:dip_6_000100.png?nolink&150 |}}
[size=150%]**S1**[/size]
{{ :en:dip_6_000110.png?nolink&150 |}}
[size=150%]**S1**[/size]
{{ :en:dip_6_011110.png?nolink&150 |}}
[size=150%]**S1**[/size]
{{ :en:dip_6_010110.png?nolink&150 |}}
[size=150%]**S1**[/size]
{{ :en:dip_6_001000.png?nolink&150 |}}
[size=150%]**S1**[/size]
{{ :en:dip_6_000000.png?nolink&150 |}}
----
===== Functional DIP Switches =====
DIP-Switch settings for CAN interface.
^ Feature ^ SW10-1 ^ SW10-2 ^
| CAN-Bus not terminated | OFF | OFF |
| CAN-Bus terminated with 120 Ohm | ON | ON |
| not defined (illegal state) | OFF | ON |
| not defined (illegal state) | ON | OFF |
^ Feature ^ SW11-1 ^ SW11-2 ^
| CAN-Bus not terminated | OFF | OFF |
| CAN-Bus terminated with 120 Ohm | ON | ON |
| not defined (illegal state) | OFF | ON |
| not defined (illegal state) | ON | OFF |