====== MBa8Xx DIP switch settings ====== 
=====Boot Modes=====

The following boot modes of the i.MX8X can be selected by the DIP switch S1 on the MBa8Xx. 
<grid>
<col sm="2">
<panel type="primary" title="SD-Card">
<WRAP centeralign>
[size=150%]**S1**[/size]
{{ :en:dip_4_0011.png?nolink&150 |}}
</WRAP>
</panel>
</col>


<col sm="2">
<panel type="primary" title="eMMC">
<WRAP centeralign>
[size=150%]**S1**[/size]
{{ :en:dip_4_0010.png?nolink&150 |}}
</WRAP>
</panel>
</col>

<col sm="2">
<panel type="primary" title="QSPI NOR">
<WRAP centeralign>
[size=150%]**S1**[/size]
{{ :en:dip_4_0110.png?nolink&150 |}}
</WRAP>
</panel>
</col>


<col sm="3">
<panel type="primary" title="Serial Downloader">
<WRAP centeralign>
[size=150%]**S1**[/size]
{{ :en:dip_4_0001.png?nolink&140 |}}
</WRAP>
</panel>
</col>

<col sm="3">
<panel type="primary" title="Boot from Fuses">
<WRAP centeralign>
[size=150%]**S1**[/size]
{{ :en:dip_4_0000.png?nolink&140 |}}
</WRAP>
</panel>

</col>
</grid>





===== Functional DIP Switches =====
DIP-Switch settings for DP-Bridge and CAN.

<grid>
<col sm="6">
<panel type="primary" title="DSI-to-DP-Bridge (S9)">
<alert type="warning"> Only available on MBa8Xx Rev.01xx</alert>
^  DIP  ^  S9  ^
|  ON  |  enable DSI-to-DP-Bridge  |
|  OFF  |  use LVDS interface  |
</panel>
</col>

<col sm="6">
<panel type="primary" title="CAN configuration (S7)">
DIP switch S7 is used to configure the CAN interfaces CAN1 and CAN2.
^  DIP  ^  OFF (default)  ^  ON  ^
|  S7-1  |  CAN0 not terminated  |  CAN0 interface terminated (120Ω)  |
|  S7-2  |  CAN1 not terminated  |  CAN1 interface terminated (120Ω)  |
</panel>
</col>

</grid>