~~NOCACHE~~

====== Entry Page ======

===== Product URL list =====

[[https://www.tq-group.com/en/products/tq-embedded/arm-architecture/tqma95xxla/|TQ product page TQMa95xxLA]]

===== Board Support Packages =====

  * [[:en:arm:tqma95xxla:linux:yocto:overview|YOCTO Linux BSP Documentation]]

 \\  \\

===== Third-Party Add-Ons =====



===== Starterkit =====

  * [[:en:arm:tqma95xxsa:mb-smarc-2:dip_switches| DIP switch settings]]

====== Hardware ======

===== Debug Connection =====

The TQMa95xxLA debug UART is connected via a FTDI USB-to-Serial converter to X26 (micro-USB) on the MB95xxCA. A micro-USB/USB-A cable for the connection to the host PC is part of the STKa95xxLA accessory set.  
Depending on the host operating system, the USB-to-serial converter driver may need to be installed.