Embedded module en tqmarzg2x TQMaRZG2x arm linux yocto YOCTO Linux \\ ===== Build Yocto SDK ===== Building the SDK requires a Yocto build environment configured for meta-tq or ci-meta-tq The setup of the build environment is described on the corresponding [[en:arm:tqmarzg2x:linux:yocto:quickstart_yocto|Yocto quickstart]] of the TQMaRZG2x. bitbake -c populate_sdk core-image-hmi After building the SDK, the installation script is located in .../tmp/deploy/sdk/ in the build directory e.g. for rocko.TQMaRZG2x.BSP.SW.0010 tq-dumpling-wayland-rzg2-glibc-x86_64-core-image-qt-aarch64-toolchain-2.4.3.sh By default the sdk will be installed to /opt/tq-dumpling-wayland-rzg2/2.4.3/ the install path can be changed during the installtion. The SDK should match to the image rootfs configuration, otherwise you may expect difficuties while debugging an application. So if the rootfs configuration is changed the SDK must be rebuilt and installed again.