==== MBLS1012AL Configuration DIP (S1) ====

<grid>
<col sm="6">
<panel type="primary" title="S1">
^  DIP  ^  ON  ^  OFF  ^
^  1  |  Hard-coded RCW enabled  |  Hard-coded RCW disabled  | 
^  2  |  Short RESET_REQ# and RESET#  |  Isolate RESET_REQ# from RESET#  |
^  3  |  Debug-UART on USB / pin header  |  Debug-UART on OpenSDA  |
^  4  |  CPU-JTAG disabled  |  CPU-JTAG enabled  |
</panel>
</col>
</grid>