==== Supported Features ====
<WRAP round important 80%>
Please note that BSP Rev. 0100 is intended to be used on a MBLS102xA Rev. 02xx and higher.

**When using BSP Rev. 0100 on a MBLS102xA Rev.01xx, please see [[en:layerscape:tqmls102xa:linux:ptxdist:how_to#use_bsp_%20rev.0100_on_mbls102xa%20_rev.01xx#|How to
Use BSP Rev.0100 on MBLS102xA Rev.01xx]].**
</WRAP>
^ Feature  ^^^^ BSP Revision  ^^^^^^ Remarks  ^
^ TQ Product  ^ Chip  ^ Interface  ^ Function(s)  ^  Prerelease\\ 7a3ec3d  ^  0004  ^  0005  ^  0100  ^  0102  ^  109  ^ :::  ^
| TQMLS102xA  | LS102x  | 2D-ACE  | 24 Bit RGB  |    |    |  •  |  •  |  •  |  •  | Pin header X17 on MBLS102xA  |
| :::  | LS102x  | 2D-ACE  | SiI9022A  |    |    |  •  |  •  |  •  |  •  | HDMI  |
| ::: | LS102x  | 2D-ACE  | SN75LVDS83B  |    |    |  •  |  •  |  •  |  •  | LVDS  |
| :::  | LS102x  | CAN1  | CAN 2.0 B  |    |    |    |  •  |  •  |  •  |  |
| :::  | LS102x  | CAN2  | CAN 2.0 B  |    |    |    |  •  |  •  |  •  |  |
| :::  | LS102x  | eSDHC  | eMMC  |  •  |  •  |  •  |  •  |  •  |  •  | mutually exclusive (cf user's manual)  |
| :::  | LS102x  | eSDHC  | SD card  |  •  |  •  |  •  |  •  |  •  |  •  | :::  |
| :::  | LS102x  | eTSEC0  | RGMII (10/100/1000 Mbit/s)  |  •  |  •  |  •  |  •  |  •  |  •  |  |
| :::  | LS102x  | eTSEC1  | SGMII (10/100/1000 Mbit/s)  |    |    |    |  •  |  •  |  •  | MBLS102xA Rev. ≥ 0200 required  |
| :::  | LS102x  | eTSEC2  | RGMII (10/100/1000 Mbit/s)  |  •  |  •  |  •  |  •  |  •  |  •  |  |
| :::  | LS102x  | GPIO  | Digital I/O  |  •  |  •  |  •  |  •  |  •  |  •  |  |
| :::  | LS102x  | I2C1  | Bus access  |    |    |  •  |  •  |  •  |  •  |  |
| :::  | LS102x  | I2C1  | EEPROM (M24C64)  |    |    |  •  |  •  |  •  |  •  | EEPROM  |
| :::  | LS102x  | I2C1  | RTC (PCF85063)  |    |    |  •  |  •  |  •  |  •  | RTC  |
| :::  | LS102x  | I2C1  | TEMP-Sensor (SA56004X)  |    |    |  •  |  •  |  •  |  •  | TEMP-Sensor  |
| :::  | LS102x  | LPUART1  | TTL  |    |    |    |    |    |  |
| :::  | LS102x  | PCIe  | PCI Express™ Base Specification, Revision 3.0  |    |    |     |  •  |  •  |  •  | PCIe slot (X35) on MBLS102xA\\ Mini-PCIe slot (X24) on MBLS102xA  |
| :::  | LS102x  | QSPI  | QSPI NOR Flash  |    |    |  •  |  •  |  •  |  •  |  |
| :::  | LS102x  | SATA  | Serial ATA Revision 3.0  |    |    |    |  •  |  •  |  •  |   |
| :::  | LS102x  | UART1  | TTL  |  •  |  •  |  •  |  •  |  •  |  •  |   |
| :::  | LS102x  | USB1  | USB 3.0 OTG  |  •  |  •  |  •  |  •  |  •  |  •  |   |
| :::  | LS102x  | USB2  | USB2517 on MBLS102xA  |  •  |    |  •  |  •  |  •  |  •  |   |
| MBLS102xA  | MBED/OpenSDA  | miniUSB  | Console  |  •  |  •  |  •  |  •  |  •  |  •  | Console available on X43 xor X5 (LPUART)  |
| :::  | SAI1  | TLV320AIC3204  | Audio Codec  |    |    |    |    |   |
| :::  | SiI9022A  | HDMI  | Ext. Monitor  |    |    |    |    |  •  |  •  |  MBLS102xA REV.0202 \\  and \\  TQMLS102xA ≥ REV.0203 required   |
| :::  | SN75LVDS83B  | LVDS  | Ext. Display  |    |    |  •  |  •  |  •  |  •  | X10 / X32  |
| :::  | SP3222E  | UART1  | RS232  |  •  |  •  |  •  |  •  |  •  |  •  |   |
| :::  | SP491E  | LPUART1  | RS485  |    |    |    |  •  |  •  |  •  |   |
| :::  | STMPE811  | I2C  | Touch  |    |    |    |    |     |    | planned for future revision  |
| :::  | USB2517  | USB2_H4   | Host  |    |    |  •  |  •  |  •  |  •  |   |
| :::  | USB2517  | USB2_H5   | Host  |    |    |  •  |  •  |  •  |  •  |   |
| :::  | USB2517  | USB2_H6   | Host  |    |    |  •  |  •  |  •  |  •  | assembly option:\\ Safenet HL Chip Sentinel  |

----