{{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqmls102xa"|mod_name_head="TQMLS102xA"|mod_arch="layerscape"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}}

<nav type="tabs" justified="true">
  * [[.:target|Target]]
  * [[.:development_host|Development Host]]
</nav>

===== Starterkit Interfaces and Functions =====

{{template>en:templates:howto:can|dipdescription="DIP switch S2 is used to configure the CAN interfaces CAN0 and CAN1."|dip1="S2-1"|dip2="S2-2"|can_image="{{ :en:layerscape:tqmls102xa:linux:yocto:tqmls102xa_can_loopback.png?nolink&400 \|}}"}}

{{template>en:templates:howto:ethernet|ethernet_description="The STKLS102xA Starterkit provides three Gigabit Ethernet interfaces."|ubootdescription="In U-Boot eTSEC3 is configured as default interface. The IP configuration can be done statically or by a DHCP server in the network."|linuxdescription="Both Ethernet interfaces are activated and configured by systemd-network. The configuration files for the interfaces are located in /lib/systemd/network/ these configuration files can be altered to customize the default interface configuration."}}

{{template>en:templates:howto:i2c|mod_name="tqmls102xa"|mod_arch="layerscape"|ubooti2c="0"|linuxi2c="0"}}

{{template>en:templates:howto:rtc|}}

{{template>en:templates:howto:temperature|}}

{{template>en:templates:howto:usb|}}