====== MBLS102xA DIP switch settings ======


===== Boot Device Selection (S3) =====
To select the desired boot medium set the DIP switches S3, S9 accordingly

<grid>
<col sm="4">

<panel type="primary" title="SD-Card">
<WRAP centeralign>
[size=150%]**S3**[/size]
{{ :en:dip_4_11xx.png?nolink&150 |}}
<alert type="warning">only for TQMLS102xA <wrap em>without eMMC</wrap></alert>
</WRAP>
</panel>

</col>

<col sm="4">

<panel type="primary" title="eMMC">
<WRAP centeralign>
[size=150%]**S3**[/size]
{{ :en:dip_4_10xx.png?nolink&150 |}}
<alert type="info">eMMC is a placement option on TQMLS102xA</alert>
</WRAP>
</panel>

</col>
<col sm="4">

<panel type="primary" title="QSPI NOR">
<WRAP centeralign>
[size=150%]**S3**[/size]
{{ :en:dip_4_0xxx.png?nolink&150 |}}\\
S3-2 ON: TQMLS102xA without eMMC \\
S3-2 OFF: TQMLS102xA with eMMC
</WRAP>
</panel>
</col>
</grid>




===== CPLD Function Selection (S9) =====
\\

<grid>
<col sm="6">
<panel type="primary" title="S9 DIP switch 1 + 2">
^  S9  ^  DIP 1  ^  DIP 2  ^ 
^  HDMI  |  ON  |  ON  |
^  LVDS  |  OFF  |  ON  |
^  UCC  |  ON  |  OFF  | 
^  LVDS_RGBINV  |  OFF  |  OFF  |
</panel>
</col>

<col sm="6">
<panel type="primary" title="S9 DIP switch 3 + 4">
^  S9  ^  DIP 3  ^  DIP 4  ^  
^  EC1  |  ON  |  ON  |
^  CAN1 / CAN2  |  OFF  |  ON  |
^  SAI1 / SAI2  |  ON  |  OFF  |
^  Reserved  |  OFF  |  OFF  |
</panel>
</col>
</grid>

<alert type="warning">The settings of DIP S9 has to match the TQMLS102xA BSP RCW configuration.</alert>
<callout type="info" icon="true">
CPLD mux mode #1 EC1_HDMI matches the default RCW configuration of the TQMLS102xA BSP.\\
If DIP S9 is not set to one of the CPLD mux modes #1 - #12, the CPLD firmware selects mux mode #1. </callout>

<panel>
^  Function  ^  S9-1  ^  S9-2  ^  S9-3  ^  S9-4  ^ 
^ #1  EC1 + HDMI  |  ON  |  ON  |  ON  |  ON  |  
^ #2  EC1 + LVDS  |  OFF  |  ON  |  ON  |  ON  |
^ #3  EC1 + UCC  |  ON  |  OFF  |  ON  |  ON  |
^ #4  EC1 + LVDS_RGBINV  |  OFF  |  OFF  |  ON  |  ON  |
^ #5  CAN + HDMI  |  ON  |  ON  |  OFF  |  ON  |
^ #6  CAN + LVDS  |  OFF  |  ON  |  OFF  |  ON  |
^ #7  CAN + UCC  |  ON  |  OFF  |  OFF  |  ON  |
^ #8  CAN + LVDS_RGBINV  |  OFF  |  OFF  |  OFF  |  ON  | 
^ #9  SAI + HDMI  |  ON  |  ON  |  ON  |  OFF  |
^ #10 SAI + LVDS  |  OFF  |  ON  |  ON  |  OFF  |
^ #11 SAI + UCC  |  ON  |  OFF  |  ON  |  OFF  |
^ #12 SAI + LVDS_RGBINV  |  OFF  |  OFF  |  ON  |  OFF  |
^ #13 - #16 reserved  |  /  |  /  |  OFF  |  OFF  |
</panel>




===== Functional DIP Switches =====
DIP-Switch settings for CAN and RS485.

<grid>
<col sm="6">
<panel type="primary" title="CAN configuration (S2)">
DIP switch S2 is used to configure the CAN interfaces CAN1 and CAN2.
^  DIP  ^  OFF (default)  ^  ON  ^
|  S2-1  |  CAN0 not terminated  |  CAN0 interface terminated (120Ω)  |
|  S2-2  |  CAN1 not terminated  |  CAN1 interface terminated (120Ω)  |
</panel>
</col>

<col sm="6">
<panel type="primary" title="RS485 configuration (S1)">
DIP switch S1 is used to configure the RS485 interface.
^  DIP  ^  OFF (default)  ^  ON  ^
|  S1-1  |  RS485 RxD not terminated  |  RS485 RxD terminated (120Ω)  |
|  S1-2  |  RS485 TxD not terminated  |  RS485 TxD terminated (120Ω)  |
</panel>
</col>

</grid>

----