~~NOCACHE~~
<embed en:templates:tabs_qnx>
  <label lang>en</label>
  <label mod_name>tqmls102xa</label>
  <label mod_name_head>TQMLS102xA</label>
  <label mod_arch>arm</label>
  <label bsp_name>qnx</label>
  <label bsp_name_head>QNX Neutrino</label>
</embed>
\\
\\
===== Overview =====
<WRAP round important>Due to licensing restrictions this BSP is available only on request  
</WRAP>
===== Bootloader =====

===== Bootloader =====

==== Supported features ====
^ Feature                                                                    ^^^^ Remarks                                    ^
^ TQ Product  ^ Chip     ^ Interface  ^ Function                                ^ :::                                        ^ 
| TQMLS102xA  | LS102xA  | eSDHC      | eMMC / SD-Card                          | Mutually exclusive (cf user's manual)      |  
| TQMLS102xA  | LS102xA  | ETSEC      | RGMII / SGMII                           |  For SGMII MBLS102xA Rev. ≥ 0200 required  | 	     
| TQMLS102xA  | LS102xA  | I2C0       | EEPROM / PMC \\ (System Reset Request)  |                                            |
| TQMLS102xA  | LS102xA  | QSPI       | QSPI NOR Flash                          | Up to 2 Devices                            |
| TQMLS102xA  | LS102xA  | SATA       | SSD/HDD                                 |                                            |
| TQMLS102xA  | LS102xA  | UART1      | RS232                                   | Default console                            |
| TQMLS102xA  | LS102xA  | USB XHCI   | USB 3.0/2.0                             | USB Storage Device                         |
\\

==== Supported boot devices ====
^  Boot device  ^  supported  ^
|  eMMC / SD boot  |  •  |
|  SPI NOR boot  |  •  |






==== QNX Neutrino ====
\\
**QNX Neutrino 6.6.0**
\\
^ TQ Product  ^ Device  ^ Interface  ^ Function  ^  Remarks ^
|  TQMLS102xA  |  Ls102x  | CAN1  | CAN 2.0 B  |   
|:::  |::: | CAN2  | CAN 2.0 B  | 
|:::  |::: | eTSEC0  | RGMII (10/100/1000 Mbit/s) |        
|:::  |::: | eTSEC1  | SGMII (10/100/1000 Mbit/s) | dhcp activated (telnet user:root , with on password) |
|:::  |::: | eTSEC2  | RGMII (10/100/1000 Mbit/s) | 	
|:::  |::: | I2C1  | Bus Access  |
|:::  |::: | QSPI  | QSPI NOR Flash  |
|:::  |::: | SATA  | Serial ATA Revision 3.0 | 
|:::  |::: | SPI1  | 
|:::  |::: | uSDHC  | SD(HC)-Card  | 
|:::  |::: | Watchdog  |  | 
|:::  | PCF85063 | I2C1  | RTC  |
|MBLS102xA  | SP3222E  | UART1  | RS232  | Console UART |
|:::  | SP491E   | LPUART1  | RS485  |  |