WORK IN PROGRESS
~~NOTOC~~
====== STKT104x DIP switch settings ======
===== Boot Configuration =====
{{:en:power:tqmt104x:stkt104x:stkt104x_s1-s4_s9.png?nolink&400|}}\\
Use DIP switches S2 and S4 on the STKT104x to configure one of the following boot devices.
==== eMMC / SD card ====
^ |::: ^ S1 ||||::: ^ S2 ||||::: ^ S3 ||||::: ^ S4 ||||
^ |::: ^ ||||::: ^ {{:en:dipb_4_0100_UD.png?nolink&100|}} ||||::: ^ ||||::: ^ {{:en:dipb_4_1111_UD.png?100|}} ||||
^ DIP |::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | :::
^ OFF |:::^ ^ ^ ^ ^:::|•|•| |•|:::^ ^ ^ ^ ^:::| | | | |
^ ON |:::^ ^ ^ ^ ^:::| | |•| |:::^ ^ ^ ^ ^:::|•|•|•|•|
\\
==== NOR Flash ====
^ |::: ^ S1 ||||::: ^ S2 ||||::: ^ S3 ||||::: ^ S4 ||||
^ |::: ^ ||||::: ^ {{:en:dipb_4_0000_UD.png?nolink&100|}} ||||::: ^ ||||::: ^ {{:en:dipb_4_1110_UD.png?100|}} ||||
^ DIP |::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | ::: ^ 4 ^ 3 ^ 2 ^ 1 | :::
^ OFF |:::^ ^ ^ ^ ^:::|•|•|•|•|:::^ ^ ^ ^ ^:::|•| | | |
^ ON |:::^ ^ ^ ^ ^:::| | | | |:::^ ^ ^ ^ ^:::| |•|•|•|
\\
\\
\\
===== TQMT1024 SerDes Configuration (0x6B) =====
\\
| |::: | **S3** ||||::: | **S9** ||
^ |::: ^{{ :en:dip_4_1000_2.png?nolink&60 |}}||||::: ^{{ :en:dip_2_00.png?nolink&40 |}}||
^ DIP |::: ^ 1 ^ 2 ^ 3 ^ 4 |::: ^ 1 ^ 2 |
^ ON |:::| • | | | |:::| | |
^ OFF |:::| | • | • | • |:::| • | • |
\\
^ **Ethernet interface assigment** ^^^^
^ X30 ^^ X37 ^^
| not used | not used | fm1-mac4 | fm1-mac2 |
| not used | not used | not used | not used |
===== TQMT1042 SerDes Configuration (0x86) =====
\\
| |::: | **S3** ||||::: | **S9** ||
^ |::: ^{{ :en:dip_4_1000_2.png?nolink&60 |}}||||::: ^{{ :en:dip_2_00.png?nolink&40 |}}||
^ DIP |::: ^ 1 ^ 2 ^ 3 ^ 4 |::: ^ 1 ^ 2 |
^ ON |:::| • | | | |:::| | |
^ OFF |:::| | • | • | • |:::| • | • |
\\
^ **Ethernet interface assigment** ^^^^
^ X30 ^^ X37 ^^
| not used | fm1-mac0 | fm1-mac3 | not used |
| fm1-mac2 | not used | fm1-mac4 | fm1-mac1 |
===== TQMT1040 SerDes Configuration (0x66) =====
\\
| |::: | **S3** ||||::: | **S9** ||
^ |::: ^{{ :en:dip_4_0000_2.png?nolink&60 |}}||||::: ^{{ :en:dip_2_01.png?nolink&40 |}}||
^ DIP |::: ^ 1 ^ 2 ^ 3 ^ 4 |::: ^ 1 ^ 2 |
^ ON |:::| | | | |:::| | • |
^ OFF |:::| • | • | • | • |:::| • | |
\\
^ **Ethernet interface assigment** ^^^^
^ X30 ^^ X37 ^^
| * | * | fm1-mac3 | unused |
| * | * | fm1-mac4 | unused |
* Connected to Ethernet switch on STKT104x (with RCW TQMT1040_SERDES66 and DIP switch configuration for SERDES66)
==== Dip Switches S1 - S4 ====
^ S1 ^^^
^ DIP ^ ON ^ OFF ^
^ 1 | GPIO DIP 0 low | GPIO DIP 0 high |
^ 2 | GPIO DIP 1 low | GPIO DIP 1 high |
^ 3 | GPIO DIP 2 low | GPIO DIP 2 high |
^ 4 | XFI_ENSMB# low | XFI_ENSMB# high |
\\
^ S2 ^^^
^ DIP ^ ON ^ OFF ^
^ 1 | TDM Interface | DIU – Display Interface |
^ 2 | SD Card / eMMC Boot | NOR Flash Boot |
^ 3 | T1024 USB-Clock (CPU Ball D3) | T1042 USB-Clock (CPU Ball F8) |
^ 4 | Serdes PLL1 clock = 156.25 MHz | Serdes PLL1 clock = 100 MHz |
\\
^ S3 ^^^
^ DIP ^ ON ^ OFF ^
^ 1 | Lane C: SGMII | Lane C: QSGMII |
^ 2 | Lane E: miniPCIe | Lane E: Aurora |
^ 3 | Lane G: miniPCIe | Lane G: SGMII or SATA |
^ 4 | Lane G: SGMII | Lane G: SATA |
\\
^ S4 ^^^
^ DIP ^ ON ^ OFF ^
^ 1 | DVDD=3.3 V | DVDD=1.8 V |
^ 2 | EVDD=3.3 V | EVDD=1.8 V |
^ 3 | CVDD=3.3 V | CVDD=1.8 V |
^ 4 | SDHC Boot | Other Boot source |
\\
^ S9 ^^^
^ DIP ^ ON ^ OFF ^
^ 1 | D21 REFCLK 156.25 MHz | D21 REFCLK 125 MHz |
^ 2 | D21 Config QSGMII to Copper | D21 Config SGMII to Copper |