====== Download URLs ======

===== ELDK Tool Chain =====

  * http://repository.reccoware.de/stuff/tq0412/arm-2008-11-24.iso

===== Debian Root-Filesystem Archive =====

  * http://repository.reccoware.de/stuff/tq0412/rootfs-squeeze-20110911-01.tgz [CURRENT]

  * http://repository.reccoware.de/stuff/tq0412/rootfs-squeeze-20110724-01.tgz
  * http://repository.reccoware.de/stuff/tq0412/rootfs-squeeze-20110624-01.tgz
  * http://repository.reccoware.de/stuff/tq0412/rootfs-squeeze-20110621-01.tgz

This archive contains a debian tree which can be mounted as the root filesystem by the TQMa28.

===== MFG Profile Linux Installation =====

  * http://repository.reccoware.de/stuff/tq0412/tqma28-mfg-linux-update-20110911-01.zip [CURRENT]

  * http://repository.reccoware.de/stuff/tq0412/tqma28-mfg-linux-update-20110724-01.zip
  * http://repository.reccoware.de/stuff/tq0412/tqma28-mfg-linux-update-20110624-01.zip
  * http://repository.reccoware.de/stuff/tq0412/tqma28-mfg-linux-update-20110621-01.zip

 
Profile for installing the bootlets, U-Boot, kernel image and root filesystem (custom or standard debian) into the eMMC flash or SD card.

===== MFG Profile U-Boot-Start =====

  * http://repository.reccoware.de/stuff/tq0412/tqma28-mfg-u-boot-20110911-01.zip [CURRENT]

  * http://repository.reccoware.de/stuff/tq0412/tqma28-mfg-u-boot-20110724-01.zip
  * http://repository.reccoware.de/stuff/tq0412/tqma28-mfg-u-boot-20110624-01.zip
  * http://repository.reccoware.de/stuff/tq0412/tqma28-mfg-u-boot-20110621-01.zip

Profile for downloading the bootlets and U-Boot into the RAM of the TQMa28 and executing them. Nothing is installed into the eMMC flash or SD card.

====== Subversion URL ======

  * https://svn.reccoware.de/tq/system/trunk

===== Important note =====

Starting with revision 143 the current (Test-) [[en:sys::downloads|20110911-01]] [[en:build:installation#root_file_system_rootfs|root filesystem]] has to be used, alternatively the package //tslib-dev// can be installed to an existing root filesystem.

In either case it is necessary to [[en:build:installation#prepare_the_eldk|prepare the ELDK toolchain]]
<code>./build/setup-eldk-toolchain.sh</code>

Afterwards Qt has to be build once by issuing
<code>make -C programs/qt install</code>
====== History ======

^ Version ^ Description ^
| 20110911-01 | new partition layout, support for LCD-Panel ET0350G0DH6, Qt Embedded  |
| 20110724-01 | installation to / boot from SD card  |
| 20110624-01 | console I/O using AUART3  |
| 20110621-01 | new U-Boot: the boot process continues even if there is no RS232 transceiver connected to the debug UART  |