{{template>en:templates:tabs_x86|mod_arch="x86"|product_type="Embedded module"|lang="en"|mod_name="TQMx130"|mod_name_head="TQMx130UC/PC/HC"}}
\\
\\
<panel type="primary" title="BIOS Version Overview">
^  BIOS Revision  ^  BIOS Version  ^  CSE Firmware Version  ^ BIOS Binary  ^ ^
|  **Rev. 0100**  |  **05.45.02.32.02**  |  16.1.27.2225  | TQMx130UC_05.45.02.32.02.bin  |  <btn block="false" type="primary" size="xs">[[https://www.tq-group.com/filedownloads/files/products/embedded/software_drivers/x86/embedded-modul/COM-Express-Compact/TQMx130/BIOS.0100_TQMx130_05.45.02.32.02.zip | Download ]]</btn>  |
\\
</panel>

<panel type="info" title="BIOS Changelog">
<accordion collapsed="true">
<panel title="UEFI Rev.0100 | 05.45.02.32.02">
  * Invert backlight polarity
  * Fix UART Port Lockup issue
  * Fix long boot time when CMOS clear
  * correct GPIO configuration
  * Hide Dual and Legacy boot type
  * Disable closed LidWovLightingSupport
  * SioNct7802y: Add and integrated Hardware Monitor
  * SioF81214: Add and integrate Fintek UARTs
  * SioTqmx86: Add, integrate and adapt driver to TQMx120UC
  * Set OEM BoardId to BoardIdRplPDdr5Rvp instead of BoardIdRplPDdr5SODimmCrb
  * Do not show Postcodes on screen or serial interface
  * Enable Snap Screen Support
  * Change Default configuration
    * MC Refresh Rate       <2x Refresh>
    * Trip Point 3 Temperature    <60°C>
    * Trip Point 4 Temperature    <70°C>
    * Package C State Limit     <C3>
    * Disable PROCHOT# Output     <Disabled>
    * Enable all Thermal Functions     <Disabled>
    * PCIe Speed            <Gen3>
    * USB Hot Key Support            <Enabled>
    * Scan Matrix Keyboard Support   <Disabled>
    * Processor Thermal Device       <Disabled>
    * GNA Device (B0:D8:F0)          <Disabled>
    * Intel(R) Dynamic Tuning Technology  <Disabled>
    * Flash Support                  <Disabled> (of MIPI camera Link options)
    * Flash Driver Selection         <Disabled> (of MIPI camera Link options)
    * Audio DSP             <Disabled>
    * I2C0 Controller       <Disabled>
    * I2C1 Controller       <Disabled>
    * I2C5 Controller       <Disabled>
    * SPI0 Controller       <Disabled>
    * UART0 Controller      <Disabled>
    * BIOS-TCSS handshake   <Disabled>
    * PCIE Tunneling over USB4   <Disabled>
    * Integrated Thunderbolt(TM) Support    <Disabled>
    * TCSS xHCI Support     <Disabled>
    * Low Power S0 Idle Capability   <Disabled> (Fix Windows shutdown issue)
    * ASPM           <Disabled>
    * L1 Substates   <Disabled>
    * L1 Low         <Disabled>
    * Control Logic 1         <Disabled>
    * Control Logic 2         <Disabled>
    * Camera1                 <Disabled>
    * Camera2                 <Disabled>
    * IPU Device (B0:D5:F0)   <Disabled>
    * Enable ClockReq Messaging     <Disabled>
    * DMI Gen3 ASPM		<Disabled>
    * DMI Link ASPM Control	<Disabled>
    * PCI Express Clock Gating	<Disabled>
    * Legacy IO Low Latency      <Enabled>   (improve real-time behavior)
    * CNVi Mode                  <Auto>
    * ISH Controller             <Disabled>
    * ACPI D3Cold Support        <Disabled>
    * Console Serial Redirect    <Disabled>
  * Adapt GPIOs
    * Fix edp backlight control issue
  * Speed up boot time (Intel delay)
  * Adapt help text for PCIe ports
  * Adapt setup menu (simplify menu)
  * Fix PCIe issue (shared clock issue)
  * Define PCIe clock mapping
  * Define USB OC mapping
  * Adapt GOP configuration
  * Integrate Verb Table for Audio codec CS4207
  * use OemSvcLoadDefaultSetupMenu for 3 x reset processing
  * Set maximal password length to 20 letters
  * Integrate TQ Boot Logo
  * Set PCD PcdCommonvidCommondidSpiEnable to TRUE
  * Configure SerIRQ in eSPI-to-LPC bridge ECE1200
  * Set some PCDs and DEFINEs
  * Set corresponding BoardID in OEM function
  * Add and adapt CSME FW Intel_CSME_ADL-P_16.1.25.2020v2_A0_Corporate
  * Disable all USB2 and SATA ports not used.
  * Disable AMT Support
</panel>
</accordion>
</panel>

----
<grid>
<col md="6">
<panel type="default" title="Windows Version Overview">
^  Supported Windows Version  ^  Drivers  ^  Status  ^
|  <icon icon="microsoft-windows"></icon> **Microsoft® Windows® 10 (IoT) Enterprise LTSC 2021 or later**  |  **TBD**  |    <badge>Compatible</badge>  |
</panel>
</col>
<col md="6">
<panel type="default" title="Linux Version Overview">
^  Supported Linux Distributions  ^  Version  ^  Status  ^
|  <icon icon="ubuntu"></icon> **Ubuntu**  |  **22.04 and later**  |    <badge>Compatible</badge>  |
</panel>
</col>
</grid>
----
{{template>en:templates:morelinksblocks_x86|}}