| Feature | BSP Revision | Remarks | |||
|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 0100 not released yet | |
| TQMa6ULxL | i.MX6UL | ENET1 | RMII (10/100 Mbit/s) | • | |
| i.MX6UL | ENET2 | RMII (10/100 Mbit/s) | • | ||
| i.MX6UL | FLEXCAN1 | CAN 2.0B | • | ||
| i.MX6UL | FLEXCAN2 | CAN 2.0B | • | ||
| i.MX6UL | GPIO | 8x GPIO | • | Available on pinheader X23 | |
| i.MX6UL | I2C2 | • | Available on pinheader X23 | ||
| i.MX6UL | I2C4 | I2C devices | • | See supported onboard I2C devices | |
| i.MX6UL | eLCDIF | Parallel LCD | • | 24-bit interface available via X19 | |
| i.MX6UL | MIPI CSI | No device on MBa6ULxL | |||
| i.MX6UL | PWM4 | Backlight Dimming | • | ||
| i.MX6UL | QSPI | Bus access Memory access | • | ||
| i.MX6UL | TEMPMON | • | Temperature read | ||
| i.MX6UL | UART1 | TTL/ USB Debug | • | Default console (RS232) on X22 / USB debug connector (X22) selectable with S16-1 on MBA6ULx | |
| i.MX6UL | UART3 | RS232 | Available via X22 | ||
| i.MX6UL | UART6 | TTL | • | Available via X23 | |
| i.MX6UL | USB_Host | USB2514 | • | ||
| i.MX6UL | USB_OTG1 | Host | • | ||
| i.MX6UL | USB_OTG1 | OTG | tested with usb serial gadget | ||
| i.MX6UL | USB_OTG2 | Host | • | Only Host supported | |
| i.MX6UL | USB_OTG2 | OTG | Shared with USB2514 Hub [4:1] | ||
| i.MX6UL | uSDHC | uSDHC1 SD Card uSDHC2 eMMC | • | ||
| MBa6ULxL | PCA9554BS | I2C GPIO expander | • | ||
| SIM | Not tested / available on Connector X12 on MBa6ULxL | ||||
| STMPE811 | resitive touch controller | Connected to I2C4 on MBa6ULxL Not tested |
|||
| USB2514 | USB1 | Host 1 | • | ||
| USB2514 | USB2 | Host 2 | • | ||
| USB2514 | USB3 | Host 3 | • | ||
| USB2514 | USB4 | Host 4 | • | ||
| SNVS | Reset | Reset PMIC-Reset Power-Down Wake-Up | • | ||
| I2C bus | TQMa6ULxL | MBa6ULxL | |||||||
|---|---|---|---|---|---|---|---|---|---|
| I2C4 | 0x08 PMIC | 0x1A Tempsensor | 0x50 EEPROM | 0x52 EEPROM | 0x68 RTC | 0x22 GPIO Expander | 0x41 Touch Controller |
||