Table of Contents
WORK IN PROGRESS
MBa8Xx DIP switch settings
SD Card
| S1 | |||||
|---|---|---|---|---|---|
 |
|||||
| DIP | 1 | 2 | 3 | 4 | |
| ON | • | • | |||
| OFF | • | • | |||
eMMC
| S1 | |||||
|---|---|---|---|---|---|
 |
|||||
| DIP | 1 | 2 | 3 | 4 | |
| ON | • | ||||
| OFF | • | • | • | ||
QSPI NOR
| S1 | |||||
|---|---|---|---|---|---|
 |
|||||
| DIP | 1 | 2 | 3 | 4 | |
| ON | • | • | |||
| OFF | • | • | |||
Serial Downloader
| S1 | |||||
|---|---|---|---|---|---|
 | |||||
| DIP | 1 | 2 | 3 | 4 | |
| ON | • | ||||
| OFF | • | • | • | ||
Boot from Fuses
| S1 | |||||
|---|---|---|---|---|---|
 | |||||
| DIP | 1 | 2 | 3 | 4 | |
| ON | |||||
| OFF | • | • | • | • | |
DSI-to-DP-Bridge (S9)
Only available on MBa8Xx Rev.01xx.
| DIP | OFF (default) | ON |
|---|---|---|
| S9 | use LVDS interface | enable DSI-to-DP-Bridge |
CAN configuration (S7)
DIP switch S7 is used to configure the CAN interfaces CAN1 and CAN2.
Termination
| DIP | OFF (default) | ON |
|---|---|---|
| S7-1 | CAN0 not terminated | CAN0 interface terminated (120Ω) |
| S7-2 | CAN1 not terminated | CAN1 interface terminated (120Ω) |