The following boot modes can be configured by setting the DIP switches S4, S5, S6, S7 on the MBa62xx.
S4
S5
S6
S7
S4
S5
S6
S7
S4
S5
S6
S7
DIP switch S9 is used to configure the CAN interfaces CAN0.
Funktion | S9-1 | S9-2 |
---|---|---|
CAN-Bus not terminated | OFF | OFF |
not defined (illegal state) | OFF | ON |
not defined (illegal state) | ON | OFF |
CAN-Bus terminated with 120 Ohm | ON | ON |
DIP switch S10 is used to configure the CAN interfaces CAN1.
Funktion | S10-1 | S10-2 |
---|---|---|
CAN-Bus not terminated | OFF | OFF |
not defined (illegal state) | OFF | ON |
not defined (illegal state) | ON | OFF |
CAN-Bus terminated with 120 Ohm | ON | ON |