Embedded module TQMa28 - Windows CE BSP documentation

Overview

BSP / Hardware compatibility

The Windows CE BSP only compatible to TQMa28 Module Revision ≤ 0202

Current versions & features

Eboot

Features

Component	Status	Remarks
CPU	+
Ethernet	+
Key: + tested \| - untested \| ? open

Windows CE 6.0

Features

Components	Status	Comments
Boot	+	from eMMC and SD-Card
Ethernet	+
eMMC	+
ext. SD	+
Display	+	FG0700K5DSSWBG01
		CLAA070LC0ACW
		ET0350G0DH6
Touch	+
USB	+	HID and Masstorage
Sound	+
EEPROM	+
CAN	+
DUART	+
GPIO	+
AUART0	+
AUART1	+
AUART2	+	not connected
AUART3	+
AUART4	+
Akku/Goldcap	-
Buzzer	+
Key: + tested \| - untested \| ? open

Changelog

Version 2.22 -15.06.14

fixed eboot issue downloading Image via Enet2
fixed EEPROM-MAC-address
added WRMac as an application
GPIO - Pindriver

Version 2.20 - 15.01.14

internal / external Ethernet-Phy has settable clocks now
supporting eMMC above 2 GB

Version 2.12 - 26.06.13

support for 10 and 100 MBIT Ethernet,Hotplug support
fixed UpdateImg.exe - Image update out of the running operation

Version 2.10 - 04.12.12

patch for PMIC
speed up system boot
show splash over the whole boot process
supporting SDHC

Version 2.02 - 08.07.12

support for reading MAC addresses from EEPROM
EEPROM addresses 0 - 0x60 could not used for application any more (not writeable)
added demo application “WriteMAC”

"WriteMAC" program process

check eboot menu point 6 for programmed MAC address in eboot
if MAC address is not set → read from EEPROM )
set MAC address

check registry for MAC addresses settings in the system image
if MAC is not set in registry, MAC address will be setup from eboot

Version 2.01 - 25.06.12

10 / 100 Ethernet auto negotation work (no hot plug support)
changed power settings in XLDR + debug messages from power register in Main() of system image
configured USB Actve-Sync to predefined COM port
SD-2 interface could be deactivated, eMMC stays active
added CLICK (Buzzer)
version is shown in eboot
added CAN Stack

Handling

source + binary - BSP as installer - package

binary image = test image out of the BSP binarys