U-Boot v2013.07 - TQMa335x/L

• tqma335x: add module identification eeprom support
• ksz9031: center flp timing
• am33xx: Always inhibit init/refresh during DDR phy init
• am33xx,ddr3: fix ddr3 sdram configuration
• ARM: am437x: Enable hardware leveling for EMIF
• ARM: AM43xx: EPOS_EVM: Add support for LPDDR2
• ARM: AM33xx+: Update ioregs to pass different values
• am33xx: Stop modifying certain EMIF4D registers
• tqma335x: adapt loadaddr and fdtaddr locations
• tqma335x: new DDR3 timing, CLKINVERT=1
• MMC: add MMC_VERSION_5_0

Linux v3.14.19 - TQMa335x/L

• mba335x: dt: adapt to etm0700g0bdh6 timing

Linux v3.14.19 (ti2014.10) - TQMa335x:

• <none>

Linux v3.14.19-rt16 - TQMa335x

• <new>

Linux v4.4.39 - TQMa335x:

• <new>

• Integration to ARM BSP (see also TQMa28 BSP changes)
• Add support TQMa335xL (same as TQMa335x, except RAM timing)
• TQMa335xL: no U-Boot build for SPI (no flash present)
• Kernel Update 3.14.19 and ti2014.10.00

Build tools

• OSELAS.Toolchain-2014.12.2

U-Boot

• MMC dsr support
• Support for multiple Ethernet PHYs
• Fixed reset freeze
• Show kernellog on tty0
• Show correct capacity for e-MMC SLC mode
• Add MAC address for second Ethernet interface

Linux kernel

• Support for MBa335x interfaces
• Median filter for analog touch coordinates
• Add sound support
• Fix RTC support in PMIC
• Fixed parallel display on mainline kernel
• Support new standard display revision
• Support new touch version on display kit (still buggy)

BSP

• upgrade gdb version to 7.7.1

Linux 3.12.10

• MMC: add support for SET_DSR command
• MMC: mmc-esdhci-imx: add DSR device tree support
• drivers: net: phy: micrel: errata for KSZ9031
• tqma335x: dt: usb1 as peripheral
• am33xx: trigger cold reset to fix samsung ddr3 freeze

U-boot 2013.07

• mmc: add setdsr suppport
• tqma335x: set dsr setting and populate to dt
• tqma335x: register both phys
• tqma335x: trigger cold reset to fix samsung ddr3 freeze