Linux 3.9 (BSP 0105)
Linux 3.5 (up to BSP 0104)
| Device | Component | Status | Version | BSP rev. | Remarks |
|---|---|---|---|---|---|
| i.MX53 | CPU | + | 3.5 / 3.9 | 0100 | i.MX53 rev 2.1 (Cortex®-A8) |
| Ethernet (FEC) | + | 3.5 / 3.9 | 0100 | ||
| DVI Display | + | 3.5 / 3.9 * | 0101 | for Rev 0102 see here for a fix | |
| LVDS Display | + | 3.5 / 3.9 * | 0101 | see Change from DVI to LVDS output Output clone only |
|
| parallel Display | + | 3.5 / 3.9 * | 0101 | see Change from DVI to parallel LCD | |
| VGA | + | 3.9 * | 0105 | see Change from DVI to VGA | |
| USB 2.0 | + | 3.5 / 3.9 * | 0102 | OTG Host, see howto configure OTG port | |
| eSDHC | + | 3.5 / 3.9 | 0101 | SD-CARD / eMMC | |
| SATA | + | 3.9 | 0105 | only with u-boot | |
| GPIO | + | 3.5 / 3.9 | 0100 | ||
| SPI | + | 3.5 / 3.9 | 0102 | known to be work on customized base boards | |
| UART | + | 3.5 / 3.9 | 0100 | ||
| I²C | + | 3.5 / 3.9 | 0100 | EEPROM, Temprature sensor, GPIO expander | |
| CAN | + | 3.5 / 3.9 | 0101 | ||
| Audio | + | 3.5 / 3.9 | 0103 | SDMA firmware needed, see here | |
| RTC (PMIC) | + | 3.9 * | 0105 | ||
| Touch (PMIC) | + | 3.9 * | 0105 | ||
| Touch (RS232 / USB) | + | 3.5 / 3.9 | 0102 | ||
| GPU | + | 3.5 / 3.9 * | 0104 | tested with Freescale binaries, see here | |
| VPU | + | 3.9 * | 0105 | CODA firmware needed, see here | |
| CSI | $ | on request | |||
| EIM | $ | on request tested on custom mainboard with 16 bit SRAM |
|||
| MBa53(LAN9514) | Ethernet | + | 3.9 | 0105 | automatic MAC configuration not implemented |
| USB 2.0 | + | 3.5 / 3.9 * | 0102 | 2 x Host | |
| Key: + tested | - untested | ? open | * patches in BSP | $ on request | |||||