To select the desired boot medium set the DIP switches S1 accordingly.
The following boot modes of the TQMa8x can be selected by the DIP switches S1 on the MBa8x.
S1
S1
S1
S1
S1
S1
S1
DIP-Switch settings for CAN interface.
Feature | SW10-1 | SW10-2 |
---|---|---|
CAN-Bus not terminated | OFF | OFF |
CAN-Bus terminated with 120 Ohm | ON | ON |
not defined (illegal state) | OFF | ON |
not defined (illegal state) | ON | OFF |
Feature | SW11-1 | SW11-2 |
---|---|---|
CAN-Bus not terminated | OFF | OFF |
CAN-Bus terminated with 120 Ohm | ON | ON |
not defined (illegal state) | OFF | ON |
not defined (illegal state) | ON | OFF |