TQMa95xxSA - YOCTO Linux BSP documentation

Overview
Quickstart BSP
Deployment
How-To
Known Issues

WORK IN PROGRESS

Create SD Card with BSP Image

The Image can be simply written to the SD Card by using the dd shell command in Linux:

$ cd <path to your image>
$ sudo dd if=tq-image-weston-debug-tqma93xxsa-mb-smarc-2.rootfs.wic of=/dev/sdc bs=1M conv=fsync #Assuming the SD card is assigned to /dev/sdc

The image must be written to the RAW device of the SD Card (e.g. /dev/sdc) and not into a partition (e.g. /dev/sdc1) !

To identify the SD card in Linux the shell command dmesg can be used:

Open a new terminal
Execute the following command without plugged SD Card
```
 $ dmesg | tail -n 15
```
Insert SD Card and wait a few seconds
Run the command from step two again

$ dmesg | tail -n 15 
 #plug in SD Card into the reader
$ dmesg | tail -n 15